deonb wrote: So why not just put your F16v2 expansion board in the middle of them and run individual wires from it? It solves both data and power dist...
Ok - so I can mount a CG-500 or similar to each tree; run a higher gauge line from the PS to each of those which will contain a fuse and distribution ...
TazChaLet wrote:first off what controller are you thinking too use with these I have two falcon 16v2's. I will probably be using cat5 for data only...
It is done to identify failures (as best as possible) before they are hung up on the roof in the cold. While pixels can fail at any time, you can at l...
I do love this about Vixen. Last year my windows were 4" spacing. This year I am thinking about moving them to 3" spacing. Whether or not this happens...
thebaronn wrote:Can I make a Triangle shape? (top row: one panel, 2nd row: 2 panels, 3rd row 3 panels.....etc) xlights will do whatever I tell it to ...
thebaronn wrote:I was looking at the wiki regarding these panels. I saw a lot of panel LxW dimensions in the examples. Do they have to be in a rectang...
tjetzer wrote:I checked on availability and cannot get the wire in 100' rolls. OK, thanks for checking.
Todd, Any chance for 100' rolls of 3 wire green extension wire?
As others have said, there is a perceived quality difference between Ray and stateside. However for many, that risk is worth the savings. Anecdotal...
I am using Pixabulbs @ 6" spacing for rooflines and 12mm nodes at 4" spacing for windows. Camera/Audience is about 40' away.
dmoore wrote:If the wire was switched to pure copper, 18 AWG wire, allowing, say, 200 pixels on a single string without power injection (currently abo...
Thanks Jon. If you were to grab your crystal ball, do you see releases in 2016 that address what you mentioned or are they longer term road maps?
