watch out the master/slave relationship is usually not enabled when in dmx mode , the assumption in the non festive lighting world that if you have dm...
in theory 1:1 approx BUT you used gels so your new red/blue/green might appear better after the change. It all depends on the factory data for your ol...
yeah Ted reads it correct. we are boxed in by the regs over here on radio spectrum use:sad: bdecosse
welcome, I'm not doing much this year got involved in a commercial project that has placed me out of action on the home front. But ask away lots of ex...
All great advice. especially about checking your hard standings, lawns and flower beds dont usually survive a visit from a MEWP, and any hint of off b...
i had a similar problem with a new (china) 3 channel controller last week fortunately it had a dmx thru connection. Turns out I had not connected the ...
Check out cpc up in Preston - as one of the manufacturing partners they usually have the best price daily stock for the board, the rest of the stuff ...
Hmmm ok I had this working for the T1000B and some ws2811s was pretty straight forward new project -> select controller and led type draw matrix us...
I think we should all have scopes and bench quality meters on our benches and lower cost DMM if you are budget limited when you are wandering around t...
I thought i should update, I was reminded while I was in the store looking out some stage braces yesterday. There was a refinement to the design done ...
Duplicate bdecosse
looking cool well impressed. are the led mounted on a rail that doubles as a stiffener for the arch along with the base retention ? bdecosse
for setting up the props on hard standing what we used to do was install flap sections that folded down when the rear leg/bar was folded to 90 degrees...
mutleyrover wrote:No problem. I can try and find that out, or buy a piece if I have to - when I do I'll put another post on here!! Mat Mat , James ...
afternoon folks, I should introduce CPC into this and all UK discussions. they used to have a minimum order policy but have relaxed in the last cou...
