I concur with et alum.. leave the sockets in place - they have no problem with direction. When desoldering always make sure you add some more solder t...
RE: "australian mini" - MPH comes from a land that has only 1, long, white cloud! Maybe from over-the-ditch Melbourne and Australia look like the same...
Ordered 2 Boards, 2 proms and 2 rs232.. Excellent work RPM!:!:
I've noticed that some of the suppliers still have stock of those 100-led Solar versions (which I have seen work pretty good - just much more expensiv...
Thanks for confirming my suspicions.. My guess is that the only places that will have stock are those that charge those stoopid prices from the start....
In case you were interested: if you've put an RS485 on the RX output (google: DMXShield), then you've turned your Arduino into a DMX512 line driver. (...
enuro12 wrote: I currently own 6 strands of bicolor LED lights, which of course wont do any good on this project. Hey don't write off those "6 stri...
Good 'un matt!... I just grabed a blank and followed my own steps and realised that I do exactly that - but just didn't without thinking about it! 😀 ...
look in the end of the connector and if you have the wires in right, you will see the copper wires hit the end.. thats when you can crimp - if you don...
Welcome to this very addictive hobby! If you can solder - you'll knock over the boards in no time.. Johns boards have soldermask... so a cinch. A fin...
The ones I have came with a foam strip in the bottom egress cable holes (these are also good to keep the spiders out of the "warmth" of an LM2805). Y...
RDP is easy to do... (don't know what this "lite" thing is.. RDP is RDP).. Windows XP: Right-mouse-click on "My Computer", go to properties and choos...
