Last seen: Nov 21, 2026
You can give it a try if you want please I've tried several times over the years and give up for lack of logical thought trying to bend someone else'...
12 years and going strong on my Megatree 10 years and counting on most of the rest
Hence the post title!
Hey Chris! Got time to pull the LedtriksUtil out of V2 and make it a standalone utility?:D
I would say replacing the $7 Parallax 32BIT P8X32A Microcontroller and reflash the unit seems to be the next step
Your testing.jpg image did not upload Hmm, Wiznet module, do you have a spare WIZ820io?
well crap.. It functions correctly. The good news is that nothing electronic so far jumps out pointing to the issue. the Parallax 32BIT P8X32A Micr...
Ok, Narrowing the source of the problem, IC2 is suspect, can you carefully measure IN and Out voltage. IC2 pins from top to bottom IN, Gnd, Out
Check the power management settings on the USB root hubs as well to be safe.
Check your Windows power saving options. A few years back my Com ports were put in sleep mode after 15 minutes to conserve power, I changed then to n...
Thanks Digging further, double check your threaded rod towers used to hold everything together for oversized grounding by the nuts used for stacking...
2k05gt wrote: I think my E682 controller is bad.. it fried all of my strings, 16 strings, 800 LEDs, they are all Super hot, and the first LED pixel is...
top right of the e682 Jumper group J21 Using 12vdc power from J19, set J21 group to 1-2 and 3-4
