PM Sent. Thx, Allen
That's great. Thanks for sharing the snowman details!
Once again I get to apologize for doing something dumb :omg: The problem was that I had Vixen3 running on two computers at the same time. My workroo...
To enable PMW (for LED dimming) should I set both of these to "1" in the .asm file before compiling? #define PWM_build 0 #define DC_build 0 I'm not ...
I will be running LEDs and the person who sold it to me said they were running incans so I know I will have to reprogram. I attached a 45 watt incan b...
Hi James, JP1 is off. I have tried JP2 both on and off, with similar results. Thanks, Allen TazChaLet wrote:how do you have the jp1 and jp2 pins s...
I had similar problems in test mode. But once I set it up in Vixen3 everything is working as it should. I just figured the test mode was a generic tes...
PM Sent
OK. I went to take a picture of the board and decided to apply power again. The LED sequence worked normally and matched the video posted by Bruce (bo...
Yes. I will post a photo tonight when I get home from work. Thanks. tucsonlights wrote:Can you show a photo of your board?
Hi Bruce, That is extremely helpful. Mine is not doing that, but at least I now know what it needs to do on initial boot up. Cheers, Allen boyelro...
Thank you for the reply. Yes - the Wiznet module is oriented with the port facing the board. Cheers DrNeutron wrote:Just one quick thing to check....
