Old school projecto...
 
Notifications
Clear all

Old school projector

6 Posts
3 Users
0 Reactions
5,086 Views
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago
[#54811]

These are about as handy as it gets for prop templating .

I purchased two of em sight unseen for $80 and they both work perfectly .
https://www.youtube.com/watch?v=-ubwWqPwo2g


5 Replies
Posts: 99
(@qubie)
Estimable Member
Joined: 12 years ago

I took a couple of pc monitors apart and laid the lcd on top of mine
made a great quality video projector for halloween i used them for 6 years changed to led projector 2 years ago
not as good picture quality but more convenient.


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

New found respect for metal/wire frame builders .

star

Reply
BoCa
Posts: 61
 BoCa
(@boca)
Trusted Member
Joined: 8 years ago
angus40 wrote:New found respect for metal/wire frame builders .

I was wonder what type/gauge wire you used for this? I have tried 9 gauge wire but cannot get it as straight and clean as you have yours, awesome job you have done.

Dave


Reply
Posts: 8517
Topic starter
(@angus40)
Illustrious Member
Joined: 15 years ago

Hi Dave

This has been a dream on the todo list for 10 yrs and wanted to give it my best effort .
I used 1/2" flat stock steel for this as it is near 7' tall and will have a 30' length of lights on it for this year.
For wire/metal gauge, I have selected 3 thicknesses of round stock steel to play with 3/16 , 1/4 and 5/16 .

I believe wire is merely a loose term as these props require a rigid metal to support having the weight of lights
or lights plus waterproofing materials attached to them .


Reply
Page 1 / 2
Share: