Now That's a Wirefr...
 
Notifications
Clear all

Now That's a Wireframe

23 Posts
17 Users
0 Reactions
15.1 K Views
Posts: 502
Topic starter
(@mmulvenna)
Honorable Member
Joined: 19 years ago
[#12415]

Now That's a WireFrame

This is what I have spent the last 2 weeks building. I cannot take credit for the design and would like to thanks Bryce Kindla for allowing me to copy his coroplast design.

I opted to build a wire frame. It contains a number of separate sections for ease of storage.

Here are 2 videos

Stats:

  • over 1500 weld joints
  • 35 feet long
  • over 900 feet of rope light
  • over 5000 zip ties
  • Rope light jointed by tinning spt2 and inserting it into the rope, then applied silicon and heat shrink.
  • 2 renard 24 channel controllers using 44 channels
  • Red, green and clear 3/8 rope light used
  • Lots of the clear was painted
  • Rope blacked out by using split flex tubing

This was the first test and as you can see there are a number of lights to fix, and some to black out.Also need to add the Drive Belt, Santa Sleigh to receive the presents, and the tobaggon for the bow throwing bear to sit on.


22 Replies
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Mike,
Can you please post this to a photo sharing site?
This link requires a membership at that site.
thanks !


Reply
Posts: 502
Topic starter
(@mmulvenna)
Honorable Member
Joined: 19 years ago
ukewarrior wrote:Mike,
Can you please post this to a photo sharing site?
This link requires a membership at that site.
thanks !

Thanks, fixed in first post.


Reply
Posts: 1372
(@fathead45)
Noble Member
Joined: 18 years ago

wow mike, awesome


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

HOLY COW!!!! That's really great, Mike!!!! 😀


Reply
Page 1 / 5
Share: