How to bend circles...
 
Notifications
Clear all

How to bend circles.

7 Posts
6 Users
0 Reactions
6,843 Views
Posts: 11
Topic starter
(@jmullan99)
Active Member
Joined: 12 years ago
[#47336]

I'm hoping to not invest too much in tools to accomplish this. I want to start building some wire frames. The circle parts should be as close to circular as possible (thanks Captain Obvious).

How do folks bend their circles?

Thanks.


6 Replies
mikeh65
Posts: 794
(@mikeh65)
Prominent Member
Joined: 19 years ago

This was more than worth the money spent. It's what I used to make my "Not-So-Mini Trees" and my 3' leaping light wreath.

https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=ring+roller


Reply
codec101
Posts: 355
(@codec101)
Reputable Member
Joined: 13 years ago

Start by making a circle jig out of plywood and a jigsaw so you have something to lay it against to know when it's round then bend by hand. If you are unsure how to cut perfect circles out of plywood, there are some youtube tutorials that can show you how.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

X2 on the HF Ring Roller. It will make just about a perfect circle once you get the hang of it.


Reply
Posts: 58
(@wood-guy)
Trusted Member
Joined: 15 years ago

I just built my first ever wireframe with 1/4" steel rod. I used a plywood jig and a vice to bend everything. the biggest challenge was to keep the bends all on the same plane. I had to make a few small circles. The lights compensate for the imperfect circles. See http://doityourselfchristmas.com/forums/showthread.php?49294-First-ever-wire-frame


Reply
Page 1 / 2
Share: