So, I inherited some wireframes from my Dad that we used to use years ago in his display (and I just have to use them now, of course). They are cool, but they are old tech so Its normal mini lights and Dad did colored tubing around it (scarf, snow, hat, etc) - The tubing is old and faded and I would like to replace it .... Any ideas where to get any?????
Do you know what the tubing made of? Steel? Aluminum? If the pieces come off you and always have them powder coated what ever color you want. If they are aluminum then you can have them annodized back to the same color if they had previously been annodized. Some of it depends on what they are made of.
Dan@ wrote:Do you know what the tubing made of? Steel? Aluminum? If the pieces come off you and always have them powder coated what ever color you want. If they are aluminum then you can have them annodized back to the same color if they had previously been annodized. Some of it depends on what they are made of.
I think he means the tubing over the lights, not the actual frame itself. I have a snowman like this where all the lights are white but there is clear/green/red plastic tubing tie-wrapped over the lights to make them colored.
You could use colored lights and perhaps some clear vinyl tubing from the hardware store unless you can locate the original stuff somewhere.
Rope light might be a good option. Clear plastic tubing can be dyed to different colors if you want to go that way.
Brian
Pictures would certainly have help clear up what you were asking.
I am thinking this is colored tubing over the lights (I've seen similar before)
I know McMaster Carr ( http://www.mcmaster.com/#standard-plastic-and-rubber-tubing/=mo2f3v ) sells some colored tubing, but, I would suggest rope lights, or consider mini light colored caps such as these - http://www.christmaslightshow.com/color-caps-for-mini-Christmas-lights.html
Would colored PVC wire loom work? something like this: http://www.cabletiesandmore.com/colorloom.php
(might be affordable if you don't need too much of it).
don
I used clear rope lights and 2" wide strips of cellophane basket wrap, spiral wrapped overlapping by 1", to rebuild some of my older wire frames with the color covers. It is cheap, comes in several colors, and it seems to work well. It can be found at many of the craft and hobby stores. Also good old black plastic trash bags can be used to black out sections of the rope lights where you don't want them to show.
This seem like a good and inexpensive method. Do you think this will work in the cold and snow?
Do you have pictures of these frames in action?
xfiredup wrote:I used clear rope lights and 2" wide strips of cellophane basket wrap, spiral wrapped overlapping by 1", to rebuild some of my older wire frames with the color covers. It is cheap, comes in several colors, and it seems to work well. It can be found at many of the craft and hobby stores. Also good old black plastic trash bags can be used to black out sections of the rope lights where you don't want them to show.
I am not sure how the cellophane will respond in the snow, haven't seen the stuff in years. Also not sure how many years it will last, I had several ropes lights and other stuff that was thrown in when I bought 20 commercial grade wireframes off someone on craigslist and just used those. I also used some of the cellophane as colored jells for my led flood lights. Here is a pic of the Santa that sits on my roof that I reworked with the rope light and cellophane.

