Brazing heavy coppe...
 
Notifications
Clear all

Brazing heavy copper wire

6 Posts
5 Users
0 Reactions
4,436 Views
Posts: 928
Topic starter
(@arw01)
Noble Member
Joined: 13 years ago
[#41258]

Wifey wants a peacock made up, since shipping to buy it would be quite high thought I would try making it.

How is copper to braze/solder with a map gas torch?

Alan


5 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Since a simple soldering iron at 150W can solder two 0 AWG (yes zero) wires, I suspect your torch may be a bit of overkill. I simple propane plumbing torch is more than you need.


Reply
Posts: 928
Topic starter
(@arw01)
Noble Member
Joined: 13 years ago

Was thinking something tougher than plain soft solder to hold the wires.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
arw01 wrote:Was thinking something tougher than plain soft solder to hold the wires.

Solder is not really soft once it forms a joint. Have you thought about using 1/4" rolled steel rod? Cheaper than Copper, fairly easy to bend or cut, welds easily too. Don't buy it at Lowes or HD, find a metal distributor, about 25% of the big box store price.


Reply
Posts: 2039
(@dougp)
Noble Member
Joined: 17 years ago

Depending on the size that you want and where you are located, it might not cost that much to have someone make it and ship it to you. The frame can be made into 2 sections to be bolted together after you receive it to save shipping cost.


Reply
Page 1 / 2
Share: