10ft Stars for towe...
 
Notifications
Clear all

10ft Stars for tower

11 Posts
5 Users
0 Reactions
9,031 Views
Posts: 135
Topic starter
(@ptone)
Estimable Member
Joined: 16 years ago
[#12810]

I'm starting a new thread for this project, since my first thread was titled too specific about ropelight.

The plan is to make 3 stars - 10ft across and mount them to 3 out of 4 faces on a large tower at the school where I work.

I'm attaching some pics - a pic of the campus, a pic of the tower with a mock up of what the stars will look like, and 2 of the star plans. One shows a wood and conduit frame, the other just shows the lit portions, with one color per channel (the light will all be white ropelight).

450ft of ropelight is ordered, and I'm going to start making up a RPM DMX16 for control. It won't be to music, just for visuals.

I'll post updates here as I go.

-Preston

campus
Screen shot 2010 11 12 at 3.13.17 PM
Screen shot 2010 11 12 at 3.13.47 PM
Screen shot 2010 11 12 at 3.14.01 PM

10 Replies
Posts: 135
Topic starter
(@ptone)
Estimable Member
Joined: 16 years ago

First construction

Here are some photos of the work I got done after work this evening. one of the primary stars with ropelight - and the start of the frame and rays.

So far zip ties are working well, but what other tricks have people found for aligning lightrope onto the top of a tube so it doesn't roll to the side? A bead of caulking?

Img001 1936x2592
Img002 1936x2592
Img003 1936x2592

Reply
Posts: 135
Topic starter
(@ptone)
Estimable Member
Joined: 16 years ago

Some more build progress, all 3 stars coming along nicely. Ran out of zip ties today just before getting the first one fully filled in with rope light. Got power up to the tower today - and brought two full rolls (300ft/900W) of ropelight up to test that we wouldn't trip a breaker.

Going through a lot of zip ties....

-Preston

Img001 1936x2592
Img002 1936x2592
Img003 1936x2592
Img004 2592x1936
Img005 2592x1936

Reply
Posts: 135
Topic starter
(@ptone)
Estimable Member
Joined: 16 years ago

Woohoo - all the stars were finished today.

Did some test sequencing with my custom software, but it was still too bright to appreciate.

A couple bits highlighted in the photos below. I came up with a way to have 2 opposite rays (one spoke) use a single segment of ropelight by "diving" the light into the PVC as a way to black out the middle. I have this make a brief appearance in the middle of the star.

The remaining challenges will be getting them up to the tower, and determine whether to wire with a terminal block, or to use extension cords.

Hope to have it up and running by mid to late next week.

-Preston

Img001 1936x2592
Img002 1936x2592
Img003 1936x2592
Img004 1936x2592
Img005 1936x2592

Reply
Posts: 899
 lbro
(@lbro)
Noble Member
Joined: 19 years ago

Looking good Preston! I can't wait to see a night time shot!


Reply
Page 1 / 3
Share: