Output Module Devel...
 
Notifications
Clear all

Output Module Development

11 Posts
5 Users
1 Reactions
2,643 Views
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago
[#58096]

Is there a simple hello-world example (or other examples) available for writing output modules?


10 Replies
Posts: 232
 JCB
(@jcb)
Reputable Member
Joined: 17 years ago

What are you trying to write the output module for, if you don't mind me asking?


Reply
Posts: 6728
Topic starter
(@p-short)
Illustrious Member
Joined: 19 years ago

A controller where, among other things, the data is sent in a non-standard order over WiFi. One of the intentions is that the system attempts to minimize the effects of missing (or greatly delayed packets) having the central node send a certain percentage of the data several seconds before it would be displayed and the display nodes would store that data. If there was a disruption the display node would have a certain percentage to the data needed for display stored in memory, and it would output a degraded display (perhaps 10 or 20 frames per second instead of 40). The core idea is to avoid as much as possible the situation where the visual display freezes for several seconds in the event of a disruption without increasing the amount of WiFi traffic.


Reply
Posts: 2215
(@ctmal)
Famed Member
Joined: 19 years ago

I had made tutorial a long time ago for an effect module when when Vixen 3 was still in beta. I doubt things work the same now but if there is nothing else, maybe things didn't change too much.

list: PL4BCC7CCA3FE53C1E
Unfortunately I never updated it because I decided at the time Vixen 3 wasn't for me. If you do check it out and it is useless, let me know. I'll pull the videos if that's the case.


Reply
Posts: 232
 JCB
(@jcb)
Reputable Member
Joined: 17 years ago

My understanding is the output controllers are set to a rate, say 20Hz. Every 50ms they wake up and sample their channel data from the Vixen engine. I don't think the design lets you get to data before or after the current frame.


Reply
Page 1 / 3
Share: