Elexol EtherI/O Out...
 
Notifications
Clear all

Elexol EtherI/O Output Module?

20 Posts
6 Users
0 Reactions
11.5 K Views
Posts: 899
(@sallz0r)
Prominent Member
Joined: 18 years ago

Thanks for that Tony. Don, are you able to confirm the latest dev build controller modules work for you?

Thanks,
Michael


Reply
Posts: 77
Topic starter
(@dononeil)
Estimable Member
Joined: 18 years ago

Everything worked great as of 3.08. I haven't tried 3.09 yet, I'll test it out this weekend and let you know.


Reply
Posts: 3
(@pegan23)
New Member
Joined: 13 years ago

Not working in 3.0.10. You cannot 'configure' the controller.
After decompiling the .dll, it seems that the HasSetup override (new method?) needs to return 'true'
I have a working version, if anyone is interested.

Sent from my iPad using Tapatalk


Reply
teberle
Posts: 641
(@teberle)
Honorable Member
Joined: 19 years ago

I will update the source and recommit to the main branch. Thanks.


Reply
Posts: 3
(@pegan23)
New Member
Joined: 13 years ago

I also use the Elexol EtherIO units. After installing the latest version (3.0.10) I discovered that it is not possible to configure/setup the module.
I have downloaded and fixed the code, but am unable to submit the changes.
* The modules now seem to require a 'true' result from a HasSetup override method.
* a bug in the Setup form (Cancel button not working)
* added some additional error trapping to prevent an unhandled exception if the Stop button is pressed when there is no communication with the EtherIO module.
* limited the number UpdateState errors to a single Log entry, until communication is restored.

I have tested the changes with my EtherIO modules and it is all working as expected.
How can I post the changes back for someone to review and include in the main project?


Reply
Page 3 / 4
Share: