Transfer sequences ...
 
Notifications
Clear all

Transfer sequences between computers

17 Posts
8 Users
0 Reactions
8,678 Views
Posts: 17
Topic starter
(@chaversr)
Eminent Member
Joined: 15 years ago
[#21967]

Well, I have been working on my sequences of my home computer but since time is running short I was wondering if there was a way to transfer the data over to a memory stick and carry the data between home and work computers.

I have the same version of vixen on both computers 3.0.3. Is it possible and if so, which files do I need to copy over.

Thanks,
Richard


16 Replies
Posts: 425
(@mkess)
Honorable Member
Joined: 19 years ago

thats the only way i do it. I write from a flash drive, save to my flash drive, and even run my show from my flash drive. But you still need to make sure you have a back up somewhere else.


Reply
Posts: 261
(@hunter310)
Reputable Member
Joined: 17 years ago

I personally dont use flash drives. I have had too many get damaged in my pocket, lost by me/kiddos, and have even had one chewed on by a puppy (surprisingly I was able to get the data off that one).

I use dropbox as my primary method of storage. Dropbox allows you to install the app locally, and point to a local folder on your computer (C:\dropbox typically). From there I install (copy really) all the files from Vixen to that folder. I save all my sequences, audio, profiles, etc there. Then on another computer, say a work computer or laptop (not that I condone sequencing at work :lol:) and it synchs everything I did at home to the other PCs. I have it setup on my laptop, workstation at work, home and my show PC. Always synched and always backed up. I also create a "SAVE" folder for all my stuff to keep a backup of my finalized files, just in case.

I highly recommend you look at it.

Steve E


Reply
kingofkya
Posts: 2165
(@kingofkya)
Noble Member
Joined: 15 years ago

Just use drop box to something to sync the whole folder.


Reply
Posts: 261
(@hunter310)
Reputable Member
Joined: 17 years ago
chaversr wrote: Is it possible and if so, which files do I need to copy over.

I just realized, I didnt answer your original question. Sorry about that.

I think 3.x is the same as 2.x, but since I am on 2.x, I dont know for certainty.
Anyhow, you need your sequences, audio, profile files. If you have a program setup, you will also need programs.
Pretty much the entire Vixen folder to be safe, but as a minimum, I would grab the Sequences, Audio, and Profile sub directories.

Steve E.


Reply
dlovely
Posts: 3167
(@dlovely)
Famed Member
Joined: 17 years ago

I will be another to say Dropbox! It also allows you to go back a version if you screw something up or delete/override a sequence you didn't mean to! Oh and its free.


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

i was just going to do the same thing in moving from PC to PC, but i noticed that all of the config files are saved in a vixen3 folder in my documents is there any way to change that behavior to put it in the same folder witht the vixen app?


Reply
Materdaddy
Posts: 2368
(@materdaddy)
Famed Member
Joined: 16 years ago

I believe Vixen 3x is NOT the same as Vixen 2x for saved files. In Vixen 2x you would simply copy the whole application folder which contained your profiles, audio, sequences, etc. In Vixen 3x there should be a new folder in your "My Documents" folder called "Vixen 3" that has everything you need to back up.


Reply
Posts: 17
Topic starter
(@chaversr)
Eminent Member
Joined: 15 years ago

Thanks for everyones help. I was finally able to get them working in both locations with a bit of effort. Since my documents on work computer was located in a different directory than my documents on my home computer, i had to do some remapping of some of the source files, ie audio, so it would be common between the two computers.
So good news is its working now. Bad news are my lunch breaks are about to get busier.


Reply
Posts: 899
(@sallz0r)
Prominent Member
Joined: 18 years ago
Materdaddy wrote:I believe Vixen 3x is NOT the same as Vixen 2x for saved files. In Vixen 2x you would simply copy the whole application folder which contained your profiles, audio, sequences, etc. In Vixen 3x there should be a new folder in your "My Documents" folder called "Vixen 3" that has everything you need to back up.

Yep, that's the one. If you grab the whole folder you'll be set.

(Not that I'm suggesting doing this, but....) you *could* probably get away with only a subset of the data inside there -- specifically, the XML files in your SystemConfig folder, and any Sequences you want. That is possibly enough to get going. However, I'd recommend copying the whole Vixen 3 folder.


Reply
Page 1 / 2
Share: