In my christmas show, I use inflatable snowmen to be the singers. They do not use the mouth/papawhatsit stuff -- it's just an RGB 3W lamp. As the singer sings, the snowman flashes on and off in time with the tune.
Making the lights (usually set to white) flash in time to the vocals is a long, arduous half dozen hours of work, listening at half speed and drawing the Set Level effect over and over again. Cut and paste can help in some songs, but not always. And when you have four of them... ugh.
In LSP, there was the ability to hit the turn on and turn off using a Midi keyboard. While it didn't work perfectly, it was good enough to make a song and with a bit of clean up afterwards, was more than sufficient. Isn't there something akin to that in Vixen? If not, is there some way to make the light for the snowman flash with the Lyrics; a misuse of Papagayo or something like that? In every other way, Vixen is making my show turn into something awesome without a billion hours tweaking and assembling. But in the speech/flash aspect, it's coming up short. Is there a component or control I'm not seeing that will do what I'm trying to do?
You should hook up with mike Hughes. (I think his screenname is HDCxxx something or other) he does the exact same thing as you. Singing snowmen and all.
You can use the mark tapper to tap marks to the words in real time. Then go back and lay effects to all the marks in that collection in one quick motion.
Or you can try something like the VU Meter effect to try and automate the process completely. You'll have to adjust the band pass settings pretty tight to get anything close to reasonable. Try to limit it to 1k-4K to start. A VU Meter on a single element isn't usually very exciting but if you set your gradient right it would get the job done for what you're doing.
Sent from my iPhone using Tapatalk
John, my screen name is Mikeh65. I have not tried you method yet. That is coming soon. What I have done is use the mark editor to "Tap out" marks and then add the light ups one at a time. Shockwave, I will have to take a look at your show. Do you have a page of videos up anywhere?
Hi Mike!
In Youtube you can find old shows in my LSP days by searching for Shockwave77598. You'll find halloween stuff too. It's just 4 inflatable snowmen with two lights, one above the other. How do i mount the lights? Internal to the inflatable, using a yard stick for the frame. Adn the wires come out the almost closed zipper at the bottom.
I use the lights that are in the Snowmen. I cut the wire that feeds them, put a plug on it and then run an extension cord out the zipper at the bottom. I use eight inflatables in my show. Four snowmen and four penguins. The four snowmen sing most all of the songs, four part harmony and the others sing backup. Which means I spend even more time listening to songs over and over, picking out each vocal part the separating them. I've been thinking about putting some pixels in each one, that way you could change their colors, blink only their head instead of the whole body. You can find stuff of my on both Facebook and YouTube under the Hughes Digital Christmas.
One nice effect of having 3W RGB in the head and the bottom is... you can change colors.
For example, "Oh Holy Night" sung by Eric Cartman -- When Eric hits the high note, the color of his head morphs from white to blue as he runs out of breath 🙂
Shockwave wrote:One nice effect of having 3W RGB in the head and the bottom is... you can change colors.For example, "Oh Holy Night" sung by Eric Cartman -- When Eric hits the high note, the color of his head morphs from white to blue as he runs out of breath 🙂
I have one singing snowman myself. Olaf, and he only sings one song. (Can you guess). He's lit with a strip of 60/m 2811 pixels. I stitched it in along his "spine" facing forward. Yeah yeah, I know he "doesn't have a skull, or bones" he told us so. Anyhow, it works well for the same reason you mentioned with the RGB. I make him tan for that part of " in summer". I also use twinkle to make him fade in and out during "let it go" at the moment where Elsa whips up a snowman. That's a cool effect. Inside the inflatable, it kinda comes off as that time warp flashback look.
Sent from my iPhone using Tapatalk Pro
Your snowmen are how big? Mine range from 6 to 9 feet tall. I questioned if getting the lights in there if it could hold them up. Would have to see. I do "Your a mean on Mr. Grinch" as one of my songs. Would be fun to turn the snowman green for it.
My Olaf is 6'. That's why I like the pixel strip. Its evenly distributed
Sent from my iPhone using Tapatalk Pro
jchuchla wrote:I have one singing snowman myself. Olaf, and he only sings one song. (Can you guess). He's lit with a strip of 60/m 2811 pixels. I stitched it in along his "spine" facing forward. Yeah yeah, I know he "doesn't have a skull, or bones" he told us so. Anyhow, it works well for the same reason you mentioned with the RGB. I make him tan for that part of " in summer". I also use twinkle to make him fade in and out during "let it go" at the moment where Elsa whips up a snowman. That's a cool effect. Inside the inflatable, it kinda comes off as that time warp flashback look.Sent from my iPhone using Tapatalk Pro
Video! 😀
Sent from my Nexus 6P using Tapatalk
