Trying to implement a pixel grid and having issues. a 10x28 grid cuts off the tails for letters such as a lower g. So I have 2 questions:
1. What is the expected column to row ration that Vixen expects (seems it is expecting a minimum of 14 pixels tall)
2. How do I adjust the text so it fits properly in the defined matrix
Bonus Question:
Why does it default to vertical for layout?
I don't have answers to your first two questions. Hopefully Jeff will chime in. He wrote the new text effect.
The vertical layout is a historical remnant. This comes from megatrees. A pixel megatree is just a skewed matrix where the rows converge at the top. They're almost always wired in vertical strands and usually start at the bottom. Since they were around before people started doing matrices, the existing effects were all written around this concept. But they work well for matrices too. So for consistency the assumed layout of a matrix is the same as a megatree. It's important to note though that your matrix doesn't need to be actually wired this way. You do need to define your groups as bottom to top columns going left to right. But with the total flexibility in patching you can connect those elements any way you like to the actual pixels.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
There is no column to row ratio. It tries to fit the text to the height of the grid, but if the font is to tall at the not size chosen, it won't fit well.
A 10 pixel high grid is getting pretty small for most text to be readable. You can try the position slider to try and center it if it is off a bit. You can lower the font size a point or two. You can type in a font size smaller than that in the drop down. Depending on the font you can probably lower it to 5 or 6. Another option is to use fonts that don't have the hanging tails.
What font is recommended? My grid is now 14x28 but what I'm findind is the displayed text isn't matching what's happening in the preview. For example, Arial 8th it doesn't use 5 of the lines nor does the text color match the gradient. I have a red to white and it displays fine on the preview but is solid red on the actual matrix. Also on the preview it appears to use all lines.
I have a 10x15 matrix sign from HolidayCoro and am having the same problem. I ended up creating PNGs of the text I wanted on piskelapp.com. I make them exactly 10x15 and then use the Picture effect to display them on the grid.
