I have a window that I physically populated to reduce number of jumps (see attached). Within that window I have an element called "Outer Window" which contains pixels #'s 1 - 58 on the string. However as you can see, pixel 1 is not the corner, pixel 44 is.
I know in preview I can rearrange corners, but can I change which pixel is designated a corner? Or do I have to repatch it a certain way?
Also, How do I get the window to behave itself in a Wipe?
Thanks,
Brian
In order for wipe to work properly, each dot on the preview needs to be linked to the element it actually represents.
Really the correct answer is that you define your element as needed within vixen for vixen to automatically lay out things for you. And then you correct the element group to the actual physical wiring by means of patching. In other words, define the element the way the preview prop wants to see it. And then in patching, connect the logical elements to the appropriate corresponding channels.
But there's other ways to skin this cat too. You can use the already defined and patched elements and redraw the preview prop using simple preview shapes. You can just use lines to draw the sides of the window. Expand the element group to show the individual pixels and then multi-select the individual pixels that represent each segment of the window and draw the line where it goes. Repeat this process for all of the window segments.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
Awesome, thanks! Looks like option B will be what to do just get it right quickly. But next year I will keep your first point in mind when doing my patching.
I will have to play with the line thing. Thanks Jon. I haven't built my winow frames yet so that tip may well come in handy.

