I have 14 individual candy canes. I can make a positive wave effect by layering a 60% Set Level with a Chase or Wipe that has a 100% peak ramp.
Is there an effect that can produce a negative wave effect? Where all the elements are at 100% intensity and the wave dips the brightness as it races across all the elements.
Or do i need to manually create this kind of effect?
Try the Wipe effect in an intensity overlay layer alongside a set level. Invert the curve on the wipe to be a V.
jeffu231 wrote:Try the Wipe effect in an intensity overlay layer alongside a set level. Invert the curve on the wipe to be a V.
I tried, that doesn't seem to work, it holds the 100% Set Level. Is there an order of operation modifier to the wipe?
Here is a screen cap of how I did it. This is on a whole house group, but should work for any fairly dense group. The flat spot on the bottom of the wipe curve is just above zero around 2. If it is at zero it will not work as desired unless it is just a V point. If your props are not very dense you may need that wider flat spot to get a wide enough dark enough zone. Otherwise the wipe is in the intensity layer and the set level is in the default layer.
And here is what it looks like paused in the middle of it. The dark zone is moving from left to right.



