Adding prop from cu...
 
Notifications
Clear all

Adding prop from custom prop editor

3 Posts
2 Users
0 Reactions
1,267 Views
Posts: 43
Topic starter
(@mdrhom1)
Trusted Member
Joined: 5 years ago
[#58431]

Hey guys thanks in advance . Last year I created 3 singing bulbs and done all my programming with them sitting in front of me this year I'm trying to add them to my preview area, I created them in custom prop editor and when I try to click on them in the element side then import them it will not link them it just creates new elements . This has worked well with all the elements at the top of preview page but not with any of my custom props. I know the custom props work I installed them on a different computer with no linked elements to a controller and then linked them and the worked fine thanks for any suggestion


2 Replies
jeffu231
Posts: 2456
(@jeffu231)
Famed Member
Joined: 15 years ago

Custom Props are the exception to linking. They are designed to be imported and create everything to match their configuration. They typically have more complex structures and would be tedious to try to match the element structure and link.

So the best approach is to import them and let it setup the new elements. Make sure the everything works with the new ones and you like what you have.

Then you have two options:
1. Copy the effects over from the old elements to the new ones. This can take some time if you have a lot of sequences.

2. The easiest way is to delete the old elements and then when you open the sequence it will prompt you that there are effects without a mapping. You can then create a map of the old to the new and save that to reuse for each sequence. There is a mapping tool in that workflow that will let you drag and drop matching new to old. Once you have it mapped save that mapping in the tool. Once you map it once, you can use that map to rapidly migrate the effects from the old to the new in each sequence.

That process works well, but with anything you should ensure you have a good backup before you start in case anything goes wrong.


Reply
Posts: 43
Topic starter
(@mdrhom1)
Trusted Member
Joined: 5 years ago

Thank you I found a work around for now. after Christmas I am going to redo my complete preview .don't want to take any chances on loosing something till then


Reply
Share: