some effects work, ...
 
Notifications
Clear all

some effects work, some do not

41 Posts
7 Users
0 Reactions
20 K Views
jeffu231
Posts: 2458
(@jeffu231)
Famed Member
Joined: 15 years ago

The chase uses the pulse to create the pulses in the chase so something is very odd here if the pulse won't work, but the chase will. Does the pulse render color in the sequencer, or is it transparent looking?


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

You mentioned that the preview works correctly. If that's the case, the problem has to be filters or patching. It wouldn't be an issue in the sequence editor or the effects.


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

Then it would seem to unpatch everything and then repatch color handling and dimming curve which are what's patched now. I will try that plus unpatching to the board which should make no difference. It has to be something simple, I'm just not seeing it at the moment

Sent from my Pixel 3 XL using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I would focus on one element first. Figure out which part is broken. Take a systematic approach, not a shotgun approach. Change one thing then test. Repeat until you find it. Then you can apply that specific change to the rest of the affected elements.


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

Will be home in a few hours, update tomorrow. Hope it's that easy.

Sent from my Pixel 3 XL using Tapatalk


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

Positive results on one element. I unpatched (in vixen) from the controller, created a new test groups, applied dimming curve, applied color handling, and repatched the test group to the same output of the controller and tested successfully the effects that were not working. This validated the controller, vixen, and isolated to the existing element setup (which seemed likely after stepping away and thinking about it). I then took a single element that was not working before that had all filters removed and no patching and setup dimming curve, color handling, and patched and it worked. Now I should be able to do the same on the other elements. I was apprehensive to do this yesterday as I hadn't changed anything (that I remember).

One question, if you setup the color handling first then apply dimming curve, is that an issue? I know on the new elements (that are not working) that is the order I did them in which seemed logical to me at the time.

As always, thanks for the suggestions as they helped refocus from the problem to the solution. One of these years maybe I will actually test earlier in the season!


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

If they are single color elements it doesn’t matter. If they are RGB or discrete multi color then it does matter. For the latter two scenarios adding a dimming curve before the color breakdown results in one dimming curve for each element. Adding it after the breakdown adds one dimming curve per color per element. So Unless you’re using different dimming curves for each color of the elements and you have good reason for doing so, you should be adding the dimming curve before the color breakdown. Every filter consumes some resources and Having three times the number of filters will eventually choke your performance 3 times as fast as only one per element.

Sent from my iPhone using Tapatalk


Reply
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I think we would like to see your broken profile if you don’t mind sharing. Would you mind zipping your profile and uploading it to a Dropbox or google drive and start a bug ticket including the profile link. It sounds like 2 or 3 people have had this problem and we’d like to figure out what is going on.

Sent from my iPhone using Tapatalk


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

I have fixed several, but several are not fixed yet so I will backup now and document which are broken and which were broken but arent any longer. It will be a bit before i can upload, but will be today for sure.


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago

Interesting you should mention chase and spiral. I posted something about issues with both from sequences in the past but not working correctly in newer versions of Vixen. I had to remake everything using those.

Sent from my SM-T710 using Tapatalk


Reply
Page 2 / 5
Share: