Is there a guide or video to show how it is done? 1st time working with V3 and pixels. I have a custom prop made from low cost RGB pixel strips that looks like a small scale Mega Tree.
I'm looking for three basic control effects,
1) whole prop one color (48 pixels), simple
2) Horizontal effect (10 layers, 4 pixels per), water fall or similar cascading effect.
3) vertical effect (4 columns, 12 pixels per), spinning/rotating radar effect.
How do you create the Element(s) and patch?
If physically the same as a Mega tree (vertical rows of nodes arranged in some type of cone shape) so matter the size, you can just model it as a mega tree. The size can be changed in the preview to make it look to scale. Give this link a look. It walks you through adding a Mega Tree.
https://www.vixenlights.com/docs/usage/preview/smart-objects/preview-mega-tree/
For the water fall type effect, take a look at meteors with high density or even the bars moving down with the 3D and some creative color gradient selection.
Spinning or radar can be accomplished with the Chase effect and a long tail. Spin is multiple chases and can repeat the effect you create with a sing chase. Other effects such as Morph can also give variations on that to manage partial spins.
MichiganLights wrote:
Is there a guide or video to show how it is done? 1st time working with V3 and pixels. I have a custom prop made from low cost RGB pixel strips that looks like a small scale Mega Tree.I'm looking for three basic control effects,
1) whole prop one color (48 pixels Chill Guy Clicker), simple
2) Horizontal effect (10 layers, 4 pixels per), water fall or similar cascading effect.
3) vertical effect (4 columns, 12 pixels per), spinning/rotating radar effect.How do you create the Element(s) and patch?
You can find guides and tutorials on YouTube by searching for "xLights V3 pixel setup tutorial" or similar. To create elements and patch them:
- Define a single Element for the whole prop (48 pixels) for solid color.
- Create 10 horizontal sub-elements (4 pixels each) for cascading effects.
- Create 4 vertical sub-elements (12 pixels each) for a spinning effect.
Then, assign effects in xLights or Vixen and map them to your controller.

