Issue adding new el...
 
Notifications
Clear all

Issue adding new elements to existing preview setup

5 Posts
2 Users
0 Reactions
5,209 Views
Posts: 14
Topic starter
(@txtyphoon)
Eminent Member
Joined: 8 years ago
[#52729]

I'm starting work on my 2020 display and have gone back in to add some additional elements to the Display Preview and am having an odd issue with the star elements I added for 4 mini trees. I added the star via the smart object menu and set it to have 20 pixels. I then click on the "(Collection)" under Linked Elements and it only shows a light count of 1. I can change it to 20 and click set, then link to the corresponding element in the list and hit OK. Then click save. If I go back in to the Linked Elements again it has reverted back to a light count of 1. However, if I click on the element under the element window, all 20 pixels turn pink and show in the element menu as green dots indicating they are linked. I wouldn't worry about it and would write it off as a display bug but my pre-existing stars seem fine and when a actually go into a sequence and assign copy and paste an effect over that element it isn't behaving consistently. Anyone encountered this before? I did copy the entire Vixen folder from the documents directory on one computer to a new computer before I started. Perhaps that isn't the correct way to transfer? I can go back and see if the issue exists on the old PC. Version is the same on both, 3.6U4 64bit. Any thoughts?

Thanks,

Brian


4 Replies
jeffu231
Posts: 2457
(@jeffu231)
Famed Member
Joined: 15 years ago

Not specifically aware of anything like that. I'll see if I can recreate it when I get a moment.


Reply
Posts: 14
Topic starter
(@txtyphoon)
Eminent Member
Joined: 8 years ago

I've gone back to the original files and started over again and I am getting the same behavior. Not sure if I'm doing something wrong or if its a bug. I've got my props now so I'm just going to try to make a custom prop based on a picture of them since I can't find the mini tree's in Boscoyo's prop library.


Reply
jeffu231
Posts: 2457
(@jeffu231)
Famed Member
Joined: 15 years ago

Look and see if the String Type is set to Pixel if you have pixel strings, then you should be able to set the number of lights and have the proper count in the collection. If it is set to standard, then it is configured for a string of single color incans/LED. That is the default. It does look like there is a bug in the smart object creation wizard. If you are letting it create the elements also, then it is not properly configuring that so that they can be auto linked. I will get that fixed.


Reply
Posts: 14
Topic starter
(@txtyphoon)
Eminent Member
Joined: 8 years ago

I got past it by just creating the new elements individually. I didn't have that many to add so it was manageable. I appreciate you looking into it.

Thanks,

Brian


Reply
Share: