Basic question on g...
 
Notifications
Clear all

Basic question on grouping

7 Posts
2 Users
0 Reactions
1,812 Views
Posts: 49
Topic starter
(@dw377)
Trusted Member
Joined: 3 years ago

I took a long time reading up and many trials before I decided to use ethernet for comms and now discovering its drawbacks, so I'm not surprised by your comment on that. However, there is not enough year left to change course; that will be a next year development if I am still up for the Christmas lights malarky. Actually I have had 4 different home made E1.31 controllers working simultaneously with Vixen generated sequences delivered by FPP on a Raspberry Pi controlling a mix of pixel props, 31V icicle strings, a creation with WS2811 chips controlling strings for roof purlins, various other custom props so I'm not sunk yet. I wanted to step back a bit and review the overall grouping so that I can coordinate whole display effects, and use Vixen for Scheduling. I am not far enough ahead with that to formulate a proper question (witness my OP) but I will likely come back when I have. Many thanks.


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

I am not saying Ethernet is bad. My objection is with the way people interpret the concept of a universe and how wasteful E1.31 is of network resources. E1.31 is a mechanism to transfer channel data over an Ethernet network. At that it does an OK job. DDP is far less wasteful of network resources, making it the (IMO) superior choice.

From your post, it sounds like you know how to patch so you should be good to go at this point. Just keep in mind: E1.31 works, DDP works better, FP Remote works best 🙂


Reply
Page 2 / 2
Share: