OK, I will admit I am trying to use a sequence from another person. HE has 198 channels , I have 128, So I tried to bring them both up in VIXEN and copy and paste each channel from his to mine, but VIXEN works for a while then gets exceptions. Has anyone successfully used a sequence from another?
The sequences I am stealing are Holdmans which were converted into vix format
I am using vixen 2.5.0.8
Thanks in advance
Dennis
Have you tried running two Vixens at the same time, it will still allow you to copy and paste between the sequences and it shouldn't stop working.
Jesse
I have to admit that 70% of my sequences are copied, I have had little trouble copying them. Other then timing issues but I feel the audiance cannot tell, I can but I have to let that go lol. I am using Vixen 2.1 not sure if that matters. I guess to ans. you question most of them work fine for me.
John
I am currently using Vixen 2.1.4 and have had no problems copying from one sequence to another. I had to do that this year because I added a lot more channels to each house. I took the old sequence from last year and copied groups of channels into this years seq. all I did was highlight the channels I wanted to move from the old and paste them in the new seq. Worked great for me, but I'm not sure if it will work with Vixen 2.5.
Good luck
Have updated the sequences from 2.1 to 2.5? When you convert the sequences from LOR to Vixen they are 2.1.
I have also copied some sequences this year ( Halloween ) and they seem to run fine for the most part , however I am getting a com port 1 port error at times.I have dleted Vixen 2.1.1.0 and reinstalled it and that seemed to work for a while but the errors came back.I have tryed swapping out the cables etc but still the problem continues at times.Any advise
Russell
Hard2kill wrote:I have also copied some sequences this year ( Halloween ) and they seem to run fine for the most part , however I am getting a com port 1 port error at times.I have dleted Vixen 2.1.1.0 and reinstalled it and that seemed to work for a while but the errors came back.I have tryed swapping out the cables etc but still the problem continues at times.Any adviseRussell
is it the same song that give you the error all the time or is it differet song ??
cheer
tweist - Silly question time, how did you :-
Quote "I took the old sequence from last year and copied groups of channels into this years seq. all I did was highlight the channels I wanted to move from the old and paste them in the new seq. Worked great for me, but I'm not sure if it will work with Vixen 2.5."
I have ever only succeeded in copying single channels between sequences by having two instances of Vixen open at the same time, how did you manage to copy "groups of channels", enquiring minds etc 🙂 Terry
I do this all the time in 2.1 but not with two instances of Vixen. I just open both sequences within the one instance and cut-n-paste away. The timing needs to be the same in both.
T.D.Sutton wrote:I have ever only succeeded in copying single channels between sequences by having two instances of Vixen open at the same time, how did you manage to copy "groups of channels", enquiring minds etc 🙂 Terry
It's a three step process:
1. select the cells you want to copy
2. copy them
3. paste them to the destination
You can click on the top left cell in a channel, then scroll to the bottom right, then shift + click on the bottom right cell and it will select everything inbetween (one channel or many). Then you can use Edit -> Copy or Ctrl+C to copy that block of cells to the clipboard, then click in the top left cell of where you want to paste them (within the same sequence or a different one), then use the Paste function or Ctrl+V and it will insert all the selected cells starting at that location. There are actually several different types of Paste functions in Vixen, depending on how you want the cells to be combined into the destination sequence, but the opaque Paste (Ctrl+V) is fine for just copying the data over.
If you arrange for the display order of the channels to be the same in the source and destination sequences, you can copy and paste over the entire sequence this way, or whichever parts you want, all in one operation. There are various ways to set the display order, including manual drag+drop in Vixen, editing the XML file directly, or I have a little utility to help do that if anybody wants to use that.
don
