Notifications
Clear all

X10 Plugin?

8 Posts
4 Users
0 Reactions
3,932 Views
Posts: 196
Topic starter
(@michael)
Reputable Member
Joined: 19 years ago
[#3279]

I was wondering if anyone has an X10 plugin that works?
I have lots of modules that are great for high power items like flood lights and large banks of strobe lights that turn on/off slowly.
I also see that X10 has a device for aiming video camera that rotate and tilt using the X10 protocal. They are cheap at about $20 each for a 2 way servo system. I can think of some great uses for these if I can get them to work with Vixen.

- Michael


7 Replies
Posts: 3
(@nh-dave)
New Member
Joined: 19 years ago

I use the x10s for the motorized deer and the blower motors. Works great for that stuff. Dont know about any other s/w. I use Active Home. Use it to control just about everything from landscape and flag lights to my fish tank light.

Dave


Reply
Posts: 150
(@alwysrit2)
Estimable Member
Joined: 19 years ago

Micahel, If you have the firecracker or a computer interface to it, you should be able to create a .bat file, then setup a Vixen Sequence with the Launcher plug in to run the .bat file with different parameters.

I know there are other threads talking about a true X10 plug in, but I have never seen any results from them.
Good luck!
-Don


Reply
Posts: 93
(@deast)
Estimable Member
Joined: 19 years ago

That's a great idea. I never thought of using a bat file to do it. It would be a good way to light up my "tune in" sign.

I have 3 working computer interfaces (2 firecrackers and 1 standard one), and a pile of outlets, switches, etc... even some motion sensors. I wonder if I could set up a trigger off of x10???


Reply
Posts: 150
(@alwysrit2)
Estimable Member
Joined: 19 years ago

I don't think you could do a trigger with the firecrackers, I think they are only a transmitter. You might be able to do it with your other one. I have the USB interface and I have some software (I don't remember which one) that will monitor for X10 signals. Do you have a X10 motion detecotor module or something else for the detection?
-Don


Reply
Page 1 / 2
Share: