Notifications
Clear all

VU Meter

4 Posts
3 Users
0 Reactions
1,604 Views
Posts: 425
Topic starter
(@mkess)
Honorable Member
Joined: 19 years ago
[#12030]

I have 6 columns across the front of my house with 4 channels each on them and want them to look like a vu meter, eq whatever it is called. I have tried all kinds of things and cant get it to look right. When I map the channels only like 4 of them ever come on through the whole song.


3 Replies
Posts: 39
(@andyb)
Trusted Member
Joined: 19 years ago

If you are talking about using the Frequency Spectrum add-in (which would make a parametric equalizer display with your lights), you can set the scale on the left side of the tool to 10x or 15x to get more activity on your mapped channels.

Hope this helps,

Andy


Reply
Posts: 39
(@andyb)
Trusted Member
Joined: 19 years ago

Another idea... If you want something like the green, yellow, red ranges on each bar, you could take the mapped channels (let's say 1-4) brightness results (hoping that you are getting a 0-100 percent brightness values), and copy channel 1 to channel 10, 11, 12 which would be your first column on the house. Channel 10 is the lower green section, 11 is the yellow on column 1, and 12 the red. Now perform a boolean and on channel 10, which is to say if there's any value in that portion of song, turn on the green lights. For channel 11 (the yellow), subtract say 40 from every value which will make the activity on the channel be the mid-volume values, then boolean and them just like channel 10. For the red channel, subtract 75 from channel 12, then boolean and that.

Rinse repeat for all 6 of your columns (18 channels total), and you have a spectrum analyzer effect.

Andy


Reply
somtng4u2c
Posts: 557
(@somtng4u2c)
Prominent Member
Joined: 18 years ago
Reply
Share: