Gentlemen,
Sorry for the LATE reply.
I have decided to not waste anymore time on the script right now. It is apparently over my head.
I tried all the scripts in this thread, making the appropriate changes, and I still get the same error. I will try later when it is not affecting my show. I have rebooted about a hundred times now.
I'll get back on it later.
Thank you all for your time and thought on this.
Sorry that we couldn't get this working for you... 🙁
But have a Merry Christmas!
..and I think most of us are already working on our shows for next year, so we will be here and sharing and thinking out loud - so definitely hit us up with questions and a solution if you find one to this problem....
...I don't have all of the answers, but hearing and working on my problems and others questions helps me to understand all of this...
bobkeyes,
After your display is over for the night or the season,
Invoke the error again and take a screenshot (Prt Scr button, open MS Paint and right click Paste into a new project) and post it here.
There is something very basic we've missed.
Now select a sequence that has your current PROFILE or the current channels your using.
Add your Script
your Channels will be the declared names in your script or it will not compile.
Add your Module(s) in most cases itt will just be the Standard.dll
Add your Plugin(s) They are the same as your current setup and MUST match your Profile or sequence plugin settings.
Save the script then it will ask you to save its module.
now its time to complile
If you have no errors, then Close the script
Under Vixen's "Sequence" pull down menu
Set the Background to "enabled"
If all is well a few (10) seconds later you should see the scrolling activity bar in the lower left corner of Vixen
Now Restart Vixen and after 10 seconds the activity bar will start running.
Thanks Steve.
I have gone through the steps EXACTLY. All goes well until the program starts. That's when the error come. It doesn't matter whether it starts with a blank sequence or one from the program, it still faults out with the same error. Click OK and the program runs. When the program is over the script takes over and runs the lights with no error.
I agree that it is something very basic, but I haven't found it---YET!
Thanks again. I'll copy the screen shot of the error the next time I work on it.

