Playing a specific ...
 
Notifications
Clear all

Playing a specific selection

9 Posts
6 Users
0 Reactions
3,450 Views
Posts: 15
Topic starter
(@willise)
Eminent Member
Joined: 18 years ago
[#6925]

I just watched all the online videos for setting up Vixen and had input the audio for my Singing Pumpkins display for this halloween.

Some of the beats are a little off and I want to try and get it as perfect as I can. Is there any way to select a certain time period, say 5 seconds, and just play that portion in a loop? That way I can zero in on where I want to put the beats exactly.

I ordered my Kit 74 today, so I hope to have the programming complete in the next week so I can test it when my Kit arrives.

BTW, the video instructions were fantastic!


8 Replies
Posts: 211
(@cmitcham)
Reputable Member
Joined: 18 years ago

you can select the time period and use f6 instead of f5 to "play from selected point" or "play only the selected range" depending on the drop down setting, and in combination toggle the "loop this sequence" icon.

it is not perfect, cause everytime you edit anything you have found to change, you have lost the selection.

the best solution i have found is to set a marker # at the beginning of your section, then #, f6 will always start playing from there. also, set your column zoom to fit the segment you want to concentrate on in the window.

i realize this sounds clear as mud, but with a little playing, hopefully you will see what i mean.


Reply
Posts: 134
(@rrowan)
Estimable Member
Joined: 19 years ago

On the row that begins with Attached plugins. Between the second icon (f6) and third icon (f7) pause, there is a drop down box. Click on that and select play selection. If the song starts you can hit the f8 key to stop if you didn't already select the selection you need.

Hope that is not too confusing

Rick R.


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

Another helpful tool is the "Audio Visualizer". If you open it, it will give you a waveform (that can be adjusted in size) that will show the beats, etc..


Reply
Posts: 15
Topic starter
(@willise)
Eminent Member
Joined: 18 years ago
rrowan wrote:On the row that begins with Attached plugins. Between the second icon (f6) and third icon (f7) pause, there is a drop down box. Click on that and select play selection. If the song starts you can hit the f8 key to stop if you didn't already select the selection you need.

Hope that is not too confusing

Rick R.

That worked perfectly! Thanks so much.

On another note, the Kit 74 has an audio input - will I need to use that with Vixen? Or do I just wire it up, plug the parallel port into the computer and run my sequence? I plan then to run the audio from my sound card through external speakers.

Thanks again!


Reply
Page 1 / 2
Share: