Vixen Version used
 
Notifications
Clear all

Vixen Version used

26 Posts
19 Users
0 Reactions
9,080 Views
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago
[#13811]

This is NOT a vixen bashing thread just to get it off on the right foot. The point of the thread is to see everyones longterm experiences with the specific versions they run.

I reverted to 2.1.4.0 this year due to problems getting unhandled exceptions in the preview in 2.5.0.8 which made sequencing irritating. However, I used 2.5.0.8 last year during my show with not one single issue with the show running or timers kicking off. This year I used 2.1.4.0 as I heard it was more stable and I have had 4 different days that the show didnt run or I got an error with the timer running.

I started rebooting each day, I have replaced the PC completely, I have redownloaded vixen and reupdated, I redid everything but the sequences themselves and I still have issues infrequently.

I havent seen movement on a new version of vixen in a long time so I dont feel real comfortable that will happen. I have even considered trying to move to lightshow pro but havent researched if my sequences can be converted, my boards, reused, etc. All I know is coming home to a dark house and knowing people drove out to see it has to be fixed.

I cant be the only one with these problems so lets post what version we run and our issues/experiences/procedures. I think I covered most of it above but onto the versions!

2.1.4.0
Only issue so far is the timer failing to run which prevented the show from running. 3 times no message poped up, the 4th I got an unhandled exception and I forget the rest as I was too frustrated.

No issues during sequencing.

2.5.0.8
No issues running the show in 2009
Unhandled exceptions with adjustable preview during sequencing

winxp, serial -> RS485, Ren16 & Ren24ss (96 channels total)


25 Replies
Posts: 2128
(@livermore-dad)
Famed Member
Joined: 16 years ago

2.1.1.0 has been flawless. 2.1.4.0 had some major com issues with my setup, would get com errors constantly. So 2.1.1.0 was/ is what I'm running and it's SOLID!

WinXP, USB - RS485, RenardSS/Frank (48 channels)


Reply
Greg in Canby
Posts: 854
(@greg-in-canby)
Prominent Member
Joined: 19 years ago

2.1.4.0 - zero problems

XP, USB -> DMX and Serial -> FireGod.

dirknerkle wrote: Not using any scripts, the viewer or anything else.

Good point, neither am I.

Greg


Reply
Posts: 375
Topic starter
(@gocats7)
Honorable Member
Joined: 18 years ago

Messed up and reposted.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

2.1.4.0 - had some initial issues because I had forgotten to turn off the wireless connection - after that I had 0 issues - running non-stop for at least 2 weeks now. I am not using BGS so I didn't run into that issue.


Reply
Page 1 / 6
Share: