Profile question
 
Notifications
Clear all

Profile question

12 Posts
6 Users
0 Reactions
4,629 Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago
[#6821]

Is there some place in Vixen that shows what profile is currently assigned to a given sequence?

I have some old sequences that I created when I first started experimenting and during that same time I was 'tinkering' with profiles and can't remember which sequence goes with which profile on some of my earlier efforts.....

Thanks

SC


11 Replies
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

Let me know if I'm wrong, but as far as I know, I don't think there is a way to see which profile is attached.

You can can always attach a new profile if you need to.


Reply
Posts: 151
(@bf210)
Estimable Member
Joined: 18 years ago

Open your .vix sequence in WordPad or another simple text editor. The attached profile is found between the and tags, after the PlugInData section.


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Ahh.....thanks...I knew there had to be a way.....:D


Reply
Posts: 999
(@ppohlman)
Noble Member
Joined: 19 years ago

So it looks like there is not a way IN Vixen, but there is a way in WordPad.
Thanks for the insight BF210.


Reply
Posts: 151
(@bf210)
Estimable Member
Joined: 18 years ago

I couldn't find it in the GUI either, but that shows one of the great things about Vixen: the data file isn't locked up with a strange format.

Since WordPad doesn't (usually) choke even on binary files, I got in the habit of throwing most any odd file into WordPad for further investigation - such as reading the first four characters of a video file to identify the codec needed to play it. To make that easier I added WordPad as a Send To... shortcut. Just don't expect to save changes successfully. 😉

(yet another Don)


Reply
WWNF911
Posts: 1722
(@wwnf911)
Noble Member
Joined: 19 years ago
Santacarl wrote:Is there some place in Vixen that shows what profile is currently assigned to a given sequence?

I have some old sequences that I created when I first started experimenting and during that same time I was 'tinkering' with profiles and can't remember which sequence goes with which profile on some of my earlier efforts.....

Thanks

SC

I'm not sure why you'd want to do that, although I understand everyone will eventually update their profile at least once a year. Having said that, you can assign a new profile to your old sequence in Vixen. Is that what the goal is?


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

I was actually looking at the possibility that I had an old profile inadvertently hooked to my sequence.... I started out with one profile but after I learned a little more I created a new profile that was ALMOST the same as the original but different enough that some stringers were on different channels.....I was having trouble with phantom flashes on one tune and was curious if I had used the old profile for that tune by mistake.......

Does that make any sense? LOL


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I don't think a profile can trigger a channel, only a sequence. Might it be a good idea to delete the obsolete profile so they don't get mixed up?


Reply
51fordf2
Posts: 1280
(@51fordf2)
Noble Member
Joined: 18 years ago
BF210 wrote:I couldn't find it in the GUI either, but that shows one of the great things about Vixen: the data file isn't locked up with a strange format.

Since WordPad doesn't (usually) choke even on binary files, I got in the habit of throwing most any odd file into WordPad for further investigation - such as reading the first four characters of a video file to identify the codec needed to play it. To make that easier I added WordPad as a Send To... shortcut. Just don't expect to save changes successfully. 😉

(yet another Don)

Another good editor, although really, really old, is PFE or Programmers File Editor. Opens up just about anything I have ever thrown at it. I don't know about Vista, but I have it running on XP and XP Pro...

Link to PFE

R


Reply
Page 1 / 2
Share: