I was talking to a friend of mine about doing the board building and pic programing that I need and he said he had a PLC that should control a thousand channels or more that he would give me 😀 . Now I have to ask is that really possible and if so would vixen control it. Does anyone know if it is possible?
Yes a plc will controll however many channels you want .
Vixen does not controll them.....
Vixen could control the PLC, ts just a matter of writing a plug-in. The one thing you need to check with PLCs are the type of outputs.. Alot of them tend to use mechanical relays not solid state. These will run both noisy and short lived. Also PLC outputs are usually design and modules of 8, 16. and require backplanes to mount to. All this can get closely, even if the initial unit is free, Growing pains will probably be painful.
pete
so would probly not be worth the trouble.
thanks to all of you
Shannon
