Ghost channels
 
Notifications
Clear all

Ghost channels

8 Posts
4 Users
0 Reactions
2,948 Views
Posts: 46
Topic starter
(@rwoomer)
Trusted Member
Joined: 18 years ago
[#28274]

Running Vixen 2.1 the same 8 ch in two different controllers stay partialy on all the time for about 75% of my songs the other 25% of the songs it works great. Swaped out controllers same result. So I'm guessing it's in Vixen where the problem lies. It also does it on both computers, worked great last few years. Just added songs this year. Need help.


7 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Make a back up of one of the sequences, then go in and edit one of the offending channels to ON ( right click "all events to full intensity" ) then play it. See if they come on to full brightness. Then on the same channel, right click it again and choose "Clear channel events" and play, see if they go off completely. If they do, then you may have some artifact events in the sequence, I have seem them before and the way I fixed them was once the channel got cleared, just copy and paste the events back in.


Reply
Posts: 46
Topic starter
(@rwoomer)
Trusted Member
Joined: 18 years ago

I did full intensity then cleared those channels everything ran great until i pasted it back in back too square one. If I turn any one of the bad channels on to full intensity and leave it on everything runs good thay are all arch segments I guess I can wrap a black bag around it for the meantime one is at the very end of the line.


Reply
Capt'n Jack
Posts: 274
(@capt-n-jack)
Reputable Member
Joined: 18 years ago

I'm having some similar ghost issues with sequences and controllers that have ran for 3 years and only occasional misfires. I'm not finished setting up yet and have a few changes being made on all sequences, but I have cleared the offending channels and still have issues. I'm using Xbees from the computer to the first controller but then Cat5 to connect all others. The issues seem to be isolated to the same few channels on the next to last controller and so far only on a few sequences.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

You cannot copy the entire channel and paste it back in, you are simply returning the artifacts. You have to do it by the events or groups of cells, basically, the areas that are off, do not include them in the "copy"


Reply
Page 1 / 2
Share: