I did one more test. This time I did not allow Vixen to upgrade to latest version
and ver 2.1.1 did not gave me any errors !!!!!!!!!
vziukas wrote:Yes, I know that well. I'm myself .net developer and doing coding 8 hours a dayAnd I keep trying different testing methods to find exact issue which causing that. I installed new 2.1 vixen (it upgrades to 2.1.4), create new sequence with new channels, create new script, import channels, put very simple simple script in while loop, even no plug ins attached I getting that error.
Are you using background scripts with vixen ?
I'm a coder, too... but no longer 8 hours/day. Owning the company helps (;)) and now I only check the finals before release or do some of the really tricky stuff...
Sorry I don't use background scripts so I'm unable to help you out on this one. All my music is padded with dead air (a few seconds on each end) and the show runs 59:40. I just restart it every 60 minutes and run it 5 times each night (starts at 5:30, ends at 10:29:40), the final sign-off sequence runs at 10:30 for 3 minutes. Everything shuts itself down at 10:45 and all I have to do is double-check the main power to ensure that's off for safety reasons since I no longer put power out in the yard 24/7.
I know many others may broadcast Christmas music outside of their shows, but I think there's such a glut of that on the airwaves already, I decided not to try to be a bona-fide radio station. 😉
dirknerkle wrote:I'm a coder, too... but no longer 8 hours/day. Owning the company helps (;)) and now I only check the finals before release or do some of the really tricky stuff...Sorry I don't use background scripts so I'm unable to help you out on this one. All my music is padded with dead air (a few seconds on each end) and the show runs 59:40. I just restart it every 60 minutes and run it 5 times each night (starts at 5:30, ends at 10:29:40), the final sign-off sequence runs at 10:30 for 3 minutes. Everything shuts itself down at 10:45 and all I have to do is double-check the main power to ensure that's off for safety reasons since I no longer put power out in the yard 24/7.
I know many others may broadcast Christmas music outside of their shows, but I think there's such a glut of that on the airwaves already, I decided not to try to be a bona-fide radio station. 😉
Yes, own something always better than work for somebody.
I put timer on each outlet, and disconnecting power from yard when I do not need based on time. Those are mechanical times rated for 15A so its enough. I have FM too, and broadcast only during show. Turning transmitter it on/off
also by timer.
I reverted back to Vixen ver. 2.1.1 and everything working fine (at least for show). For editing I will keep latest.
Good post. I have been having this issue as well. I will try reverting back to 2.1.1.
I also reverted back. Everything works fine unless I use a while(true) loop in my BGS. I have unselected the BGS and just let it run continuously but then I get a com port error when the program runs, stopping the show. If I use the non while(true) loop and select the BGS it runs fine the first time, then when it completes the script, it will not start again until Vixen is restarted. Had this problem with 2.1, which is why I reverted back to 2.0. I PM'd KC about this, since it is obviously an issue with many, but as it is so close to Christmas, I'm sure he is busy, I haven't heard back. Any ideas, anyone. I would like for the BGS to play properly which would solve all problems. Show is small this year, but going big for next year and would like to not have these problems.
