I grabbed some of my DMX flood lights and connected them to an ENTTEC Open DMX dongle.
Started a new Vixen sequence using the wizzard.
It is basically 16 channels of chasing and sparkle with the OPEN DMX Pluggin
does Channel 1 map to DMX channel 1?
The reason I ask is I get zero out on the Lights.
Things I have already tried:
DMX LED terminator indicates a DMX stream
My Manolator DMX512 work - proving the hardware.
What else should I try?
Hi Matt,
Did you install any drivers for the Enttec?
Did you set the correct port/speed and channels in Vixen?
Try a different cable from the computer?
Rick R.
Rick,
DMX Add-in is enabled.
In the profile i have Enttec Open DMX plugin.
Do I need to install additional driver for Enttec Free USB?
Matthew
Matt_Edwards wrote:Rick,
DMX Add-in is enabled.
In the profile i have Enttec Open DMX plugin.Do I need to install additional driver for Enttec Free USB?
Matthew
No totally sure but they do have a driver for open dmx usb
http://www.enttec.com/?main_menu=downloads
I only have used RJ's lynx dmx dongle so I am just taking a guess.
Hope it helps
Rick R.
Thanx for the link.
I tried installing that and it still doesn't work. As I said I can still run Manolator light desk on my computer and the lights work.
If Look at the LED terminator I would guess the DMX stream is not correct as the both coloured LEDs are on about the same amount.
Any other suggestions?
Got it going - Sort of.
Vixen now crashes.
Matt
Matt_Edwards wrote:Got it going - Sort of.
Vixen now crashes.Matt
At this point, I'd download a fresh copy of Vixen; once it starts acting squirrelly (a technical term), I've found that a fresh copy sometimes solves the problem.
\dmc
Yeah ,I know what you mean. I must be ready for my annual M$ rebuild.
I already tried a reload of Vixen.
KR
Matt
what do you mean vixen crashes?
i have had issues with vixen and my open dmx dongle on 6 different computers now. some not even mine.
It seems to hang when vixen wants to close the port. seems to be some sort of bug but im not sure if its my hardware or vixen.
Peter
Vixen will close completely by itself OR It will go into a "Not responding" state
Before I do anything else i will be turning on the old Win2000 box and try that out instead of my Dell Vista.
Cheers
Matt
