COM port start up p...
 
Notifications
Clear all

COM port start up problem

3 Posts
2 Users
0 Reactions
1,686 Views
Posts: 529
 Josh
Topic starter
(@josh)
Honorable Member
Joined: 19 years ago
[#12237]

I am Running windows vista, and using a Lynx dmx dongle. I can setup a sequence, and it will work, i start playing around with it, and i get this.
I had a sequence run for about 20 hours, so it was working. It is just when i play with the test channels, or start and stop the sequence.


2 Replies
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

My guess is that there's a "hidden" copy of Vixen that's running and it's hanging onto the port so you get a sharing violation. Check the Windows task manager, select the PROCESSES tab, and click on the column heading titled "Image Name." This will alphabetize the processes running on the PC; scan down to the V's and if you see two Vixen processes running, that's your problem.


Reply
Posts: 529
 Josh
Topic starter
(@josh)
Honorable Member
Joined: 19 years ago

Thanks, you were on the correct path. You have to make sure you CLOSE the test channel window.


Reply
Share: