com port error
 
Notifications
Clear all

com port error

11 Posts
5 Users
0 Reactions
3,515 Views
Posts: 93
Topic starter
(@quefol)
Estimable Member
Joined: 18 years ago
[#9159]

hello im runing vixen 2.1 it runs fine for a hour with my sequences but than i get a error mesage (router) access to com port 2 denied im am running windows xp any sugestions.


10 Replies
Posts: 3
(@liquidretro)
New Member
Joined: 17 years ago

Consider moving to the newest version of Vixen 2.5.0.8


Reply
Pwmcguire
Posts: 575
(@pwmcguire)
Honorable Member
Joined: 18 years ago

My show has been running fine, now it seems that I get no communication after channel 17 on a renard 24 ss I have 2 renard 16 xmus boards after that that are not working. I am also getting a com port error ( access to com port 1 denied ) when I open up the test channels box, any suggestions


Reply
Posts: 345
 Trip
(@trip)
Reputable Member
Joined: 19 years ago

Thats the exact same issue I am having with 2.5.0.8, I have 2.1 running just fine.


Reply
Pwmcguire
Posts: 575
(@pwmcguire)
Honorable Member
Joined: 18 years ago
Trip wrote:Thats the exact same issue I am having with 2.5.0.8, I have 2.1 running just fine.

When did it start, today?


Reply
Posts: 345
 Trip
(@trip)
Reputable Member
Joined: 19 years ago
Pwmcguire wrote:When did it start, today?

It started as soon as I started running the schedule yesterday. Every time it went from background sequence to scheduled program it would screw up. It's in the grow up 2.5 thread. 2.1 runs 2.5 sequences, so I threw everything back into 2.1 that I made with 2.5 and have it running just fine now.


Reply
Pwmcguire
Posts: 575
(@pwmcguire)
Honorable Member
Joined: 18 years ago

do I have to do something to convert my sequences to 2.5.x.x?
or will it go straight over.
Do you have automatic updates on in your os.


Reply
Posts: 345
 Trip
(@trip)
Reputable Member
Joined: 19 years ago
Pwmcguire wrote:do I have to do something to convert my sequences to 2.5.x.x?
or will it go straight over.

read the 2.5 grow up thread, you have to run prepare.exe.


Reply
Pwmcguire
Posts: 575
(@pwmcguire)
Honorable Member
Joined: 18 years ago

It was a true com port error, com port 1 became corrupt. I have channel 1 to 56 on com port 1 and 57 to 112 on com port 2. The way I fixed it was to put all of my channels on com port 2. I had to run another cable from the end of 56 to 57 and put them all on com port 2. I originaly ran two com ports to eliminate the cable I had to put on tonight. but it's back up.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
Pwmcguire wrote:It was a true com port error, com port 1 became corrupt.

Interesting and unexpected problem. One way you can *sometimes* resurrect hardware components like that is to (1) close all applications, (2) go to the hardware device manager, (3) delete the port, (4) shut down the computer (and power it off).

Then restart the computer and let Windows re-recognize the hardware. It should reestablish the registry links, proper memory location, drivers, etc.

This will bring back a port about 70% of the time.


Reply
Page 1 / 2
Share: