Timer execution han...
 
Notifications
Clear all

Timer execution hangs

11 Posts
8 Users
0 Reactions
2,253 Views
Posts: 229
Topic starter
(@mrplow123)
Reputable Member
Joined: 19 years ago
[#1594]

So 2 nights ago I came home to a dark house, the worst thing that can happen in this hobby. I go to the computer to see what is going on and the timer execution box is still on the screen, says the program is running, but nothing is happening, no sound or lights. So I hit stop all, then restart timers. The timer execution box pops up, but still no output of any kind. So I restart Vixen, and hit restart timers, and all is good again. I figured it was just a freak occurance, and ignored it. Last night everything worked great, from start to finnish.

So about 10 minutes ago, I am sitting here watching my lights run on my survelance cameras, and it is working great, then it gets to the end of the show, and DARKNESS. There is still 30 minutes left to go on the timer. SO I go out to the garage and look at the screen, same thing as the other night, timer execution still on the screen, no errors, but no output. So I had to close Vixen and reopen it and restart timers. Now it is running again without problem. I am not sure what can be going on, and with out an error message, I don't think you can tell me what is wrong either. The only thing I changed in the last few days, was a new clean install of Vixen to fix my other problem, and I am running a different computer. So I guess I have to blame the computer for now.

Sure is weird that it seems to only do it after 2 days.


10 Replies
Posts: 705
 KC
(@kc)
Prominent Member
Joined: 20 years ago

I'm sure there is something else going on with the application that it's not telling us about. I will try to come up with something it can log so we can get an idea of what's going on.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

KC, this sounds idenicle to what I experienced , but I get the Microsoft error when I close Vixen, as per the thread I started in Bug Reports.


Reply
Posts: 87
(@tfmacz)
Estimable Member
Joined: 19 years ago

Timer Execution Hangs

OK, Experianced the same issue here. This is the first time it has happened here. been running the same program for a week now. I restarted Vixen today and it grabbed the 2.0.4.2 update. Not sure if that is related.

The situation.
I have a 4 sequence program that runs about 13 minutes. I have the scheduler set to repeat/run the program from 4:30pm to 10:00pm each night.
There is nothing scheduled after 10:00pm
I have a looping "AllOff" script set for background execution and the background music player set to play.

What Happened.
At 10:00pm the program was about half done. The lights were playing the program but the music was from the random list in the music palyer. This continued until the program ended. When the program finished at about 10:07pm the timer window did not close. And the background script did not start. The background music player continued to play from the random list.

I was able to close the timer window by clicking the "Stop All" button. 10 seconds later the background script started.

I recall something about a timer dump but remembered it after I killed the timer window. If it happens again should I use this "timer dump"?

Anything else I can do to help sort this out?

Thanks...
Ted


Reply
Posts: 87
(@tfmacz)
Estimable Member
Joined: 19 years ago

Last night everything worked. 10:06 the program ended, 10:06 plus 10 seconds the background music and script started.

I did absolutely nothing to the system in between.

Go figure????

Ted


Reply
Posts: 78
(@cgarwood)
Estimable Member
Joined: 19 years ago

I have been having some random timer issues as well.

Timer is set to start at 5:30pm. There have been a few times (completely random) where I have come home to a dark house. When I looked the the computer it had thrown up some sort of Router error saying something about an object reference not set to an instance of an object. (I forget the exact message, its not one of the default .NET exception windows) All I have to do is click ok on the error message and it starts back up. Not sure what is up with it.


Reply
Posts: 30
(@mike78cobraii)
Eminent Member
Joined: 19 years ago

I get the same router error and clicking the box resumes the show


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

Yep I had that on the first couple of nights I tried to run 2.0 B4 for my show. The show never started (I was outside waiting with cars lined up). Came in, clicked on the OK box in the error and the show started.

I went back to 1.1.11 for stability, but I have been running 2.0 B4 on this PC (Not the show PC) in the background for 7 days or so now & its never missed a beat. Both PC's are running XP Pro with the latest updates & patches, and net 3.0 as well


Reply
Mudsculpter
Posts: 1223
Admin
(@mudsculpter)
Member
Joined: 19 years ago

I posted this in another thread but I had been having the same issues. Ialso had usb to serial converters. I replaced then with a dual serial pci card. I have had no com or router errors since,....


Reply
daviddth
Posts: 925
(@daviddth)
Prominent Member
Joined: 19 years ago

While I have a USB to serial on that PC, it's only for the LED sign, not any Vixen controlled item. Hmmm, might be the drivers I guess?


Reply
Page 1 / 2
Share: