2011 Progress Repor...
 
Notifications
Clear all

2011 Progress Reports

175 Posts
67 Users
0 Reactions
51.5 K Views
Pwmcguire
Posts: 575
(@pwmcguire)
Honorable Member
Joined: 18 years ago

Been running flawlessly since 5:00 pm with a couple of cars viewing it.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
PD Shimmers wrote:Dirk,
Just ran by to see your display. Nice Job! i love ludefisk rock-pure minnesotan.

Completed my last night of testing just a few minutes ago. the shimmer begins at 5 tomorrow.

mike

Mike, the start of your show is on my calendar! Can't wait to see it!

The Lutefisk Rock was recorded by a good friend of mine -- he actually had some commercial CDs made of it about 5 years ago and gave them out to friends along with his Christmas Card. He's a hilarious guy, loves to laugh... and, he's a local lawyer, believe it or not!!!

Happy Thanksgiving to you and your bride!

-dave


Reply
Posts: 75
(@slyfox04)
Trusted Member
Joined: 17 years ago

Mines up and running. I'm impressed at the Spiral Tree its just so sexy. But somehow feel like putting up more lights lmao. Selling up after this year due to the lack of competition around, Only 12 displays in the local competition and only 2 in the Grand Display category which I'm competing in :(.

IMG 0716

Hopefully everyone got all their lights out as planned this year :D.


Reply
Posts: 214
(@chesterspot)
Estimable Member
Joined: 16 years ago

I'm almost there. Only need to outline the yard, add some lights to a bush/tree, and try to work on some sort of 1/2 mega tree. The wife asked for it.


Reply
lightman
Posts: 1524
(@lightman)
Noble Member
Joined: 19 years ago
chesterspot wrote:I'm almost there. Only need to outline the yard, add some lights to a bush/tree, and try to work on some sort of 1/2 mega tree. The wife asked for it.

Ha Ha... now your talking! It's good when your spouse asks for lighting effects... sounds like you are almost there.

Half my show is tested and working other half is scheduled for check out today. All Light effects are up, power umbilicals run, control center set up, Dimmer boxes in installed. Just running last of data lines this morning. Ahhh if only wireless....

Still plan to go live on 1 Dec.

Regards,
Lightman


Reply
Posts: 214
(@chesterspot)
Estimable Member
Joined: 16 years ago

Lightman,

All year she nags me about how much I spend on Blinky-Flashy but once she starts helping put up the lights the attitude changes. She starts asking for more stuff. Last year I was out of channels and kept telling her that I needed more to do what she wanted. Luckily this year I have a bunch of extra channels. (Thanks Group Buy Guys). I ran my Intermission sequence last night as well as each sequence.

For those of you who don't know I'm running my show using a wireless->ethernet bridge that connects to the WIZ125SR Ethernet->Serial converter. My netbook runs the show wirelessly using a virtual serial port. It was an awesome thing to be able to take the machine outside and walk around the house testing lights. I was able to set it out on the sidewalk and listen to the show since I didn't have my FM transmitter up and running. I'm very excited about it, if you can't tell! :wow:


Reply
Macrosill
Posts: 9739
(@macrosill)
Member
Joined: 20 years ago

I finally have the lights up. I have the mega tree, icicles and roof lines on static until I can fix all strings that are out and tweek the sequences.


Reply
lightman
Posts: 1524
(@lightman)
Noble Member
Joined: 19 years ago
Macrosill wrote:I finally have the lights up. I have the mega tree, icicles and roof lines on static until I can fix all strings that are out and tweek the sequences.

If I lived in NY, I would be over there helping you out. It is the least I can do to say thank you for all you do on this site...especially the extra work required recently that postponed your set up.

Sincerely,
Lightman


Reply
rjchu
Posts: 1191
(@rjchu)
Noble Member
Joined: 17 years ago

Man, I sure felt like an idiot yesterday!

Last night was "go live" night for our neighborhood and we've been frantically setting everything up since the Friday after Thanksgiving (next year we'll start earlier). Yesterday afternoon I started connecting all of the controllers that needed to be connected (I went wireless for most things this year) and everything was going great until it came to test the Ren48LSD's with the RGBW SuperStrips (both of these are also new additions for this year). On one Ren48 I got nothing. On the other, the RBW channels were pegged on across all strips. I tested the power supplies, reflashed the PIC's (twice), swapped out the PIC's, swapped out the RenW's, swapped out the serial IC's - all over the course of an hour or so of troubleshooting. Only to realize when I had one of the setups on my work table that...these new RenW's need either a RX or TX jumper. I'd completely forgot about this. The older RenW's I'm using everywhere didn't need these. Once I placed the jumper on, everything was as it should be in the universe - complete with me looking like an idiot in front of the wife who watched me running around in circles for that hour of panic just before the curtain was set to go up for the show. Lesson learned - check the simplest things first and RTFM! 😉

Good luck everyone!

-joni-

PS: The first night was a hit. More sequences and touch-ups to come this week though.


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Not quite there, probably another day or two. The 72 channels on the house seem like a good idea while I was planning it while sitting in a chair. My legs are killing me and my fingers are sore from a couple hundred clips to hold them onto the house. Half of the house has all new controllers that were working on the bench.

It can’t snow until I’m done.


Reply
Page 13 / 18
Share: