I have my house set to run a whole house color wash until I finish putting up the rest of my show lights. Tonight when I came home, one port of lights was flashing randomly. Most of the time it was doing what it should, but every now and then it would flash, sometimes white and sometimes color. The cable to the first pixel isn't very far (maybe 10 feet). I am using a Falcon F16v4 with FPP. I tried using the testing mode in FPP with a fill pattern and it continued to exhibit the behavior. From what I can tell, it does not happen when I run a test directly from the Falcon, though it's hard to say for sure. I tried a red ramp and didn't notice as well as a solid white. It does not happen when the lights are "black."
During my show, it won't be all that noticeable, but still...
Any ideas?
Look closely. Do all of the pixels (Starting at P1) flash or do the first few work properly and the rest flash?
Where are you injecting power?
No rain, but the initial cable is laying in a garden bed that does get watered by some sprinklers. The power injection is further down the line. The flashing occurs on either side of the power injection.
Yesterday I finished setting up the rest of my display. Initially, the string was really going crazy, but while attaching more props, several cables got jostled. Now the problem is gone. It must be a bad connection, but I guess I won't worry for now about trying to figure out where exactly. My Tune To sign also had a problem area right where I attached a splice. Moving the spliced area made the problem go away. Guess I need to work on making better connections...
