Startup Question
 
Notifications
Clear all

Startup Question

5 Posts
4 Users
0 Reactions
1,726 Views
Posts: 5
Topic starter
(@lambo)
Active Member
Joined: 12 years ago
[#33928]

Im new to this and would like to start small and cheap until I get a good idea on what I can do with different hardware. In order to keep costs low while I learn could I start with the vixen software and renard ss8 controller?


4 Replies
Posts: 321
(@frostbyte25)
Reputable Member
Joined: 15 years ago

Welcome! Yup that will get ya started...somewhat...lots of lil things to get... Output cords...just extension cords cut and wired to controller...a serial cable for communication from pc to controller....umm maybe a usb-serial adapter if your computer doesnt have a serial port.. Id highly advise to get one of waynej's starter kits (or just look at what it contains) along with the SS8 board. that would definetley get you going.. Oh yeah ya gotta solder the board together...I did mine with a cheapo iron from walmart...it did the job. Just keep reading and you will filter what ya need and dont... Plenty of info and helpful folks here!

(Edit)
Also check here...its a good place to grasp some of the ins and outs of this hobby

http://www.doityourselfchristmas.com/wiki/index.php?title=DIYC_Beginners_Info

Trav


Reply
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

I think that would be a great start. If you're just starting out you might want to check out the startup kits from WayneJ. It'll have everything you need to get started. Since you mentioned you want to keep it cheap, just keep in mind the little things can add up...extension cords, etc.


Reply
Posts: 5
Topic starter
(@lambo)
Active Member
Joined: 12 years ago

Thanks for the info, hopefully I can get it running before Christmas is over!


Reply
JasonPortwood
Posts: 753
(@jasonportwood)
Noble Member
Joined: 17 years ago

Also put your location in on your profile. Other members may be nearby and may be able to help out if you get stuck or need a spare part.


Reply
Share: