I thought so to, seemingly if they're made of the same material and rated for the same carrying capacity of 160PSI that they would be the same thickness.
I finally tried out the different pipes I bought by cutting off short sections. I used a BTF-LIGHTING WS2811 5m 16.4ft 30LEDs/m 10Pixels/m 150LEDs 50pixels IP66 that I purchased from Amazon.
The very left is the Apollo. What I like about it is that it diffuses the light very nicely. However, it is not very bright. The next one is from McMaster 7/8" which has half the wall thickness compared to the next one which is 1". The one to the right is also from McMaster but is the 2" version. This one gives you the nicest blurr unless the LEDs are right against the wall (as they are at the transition from the 1" to the 2"). But just like with the Apollo it is not as bright.
I am still not sure which way to go but as of now I think I would go with the 1" from McMaster but try to keep the lights away from the "front wall" (the one that people will see). The Apollo is kind of hard to bend and so is the 2" McMaster plus the 2" takes up quite a bit of storage. I still would like to see how the SharkBite looks like.
munu wrote:I finally tried out the different pipes I bought by cutting off short sections. I used a BTF-LIGHTING WS2811 5m 16.4ft 30LEDs/m 10Pixels/m 150LEDs 50pixels IP66 that I purchased from Amazon.The very left is the Apollo. What I like about it is that it diffuses the light very nicely. However, it is not very bright. The next one is from McMaster 7/8" which has half the wall thickness compared to the next one which is 1". The one to the right is also from McMaster but is the 2" version. This one gives you the nicest blurr unless the LEDs are right against the wall (as they are at the transition from the 1" to the 2"). But just like with the Apollo it is not as bright.
I am still not sure which way to go but as of now I think I would go with the 1" from McMaster but try to keep the lights away from the "front wall" (the one that people will see). The Apollo is kind of hard to bend and so is the 2" McMaster plus the 2" takes up quite a bit of storage. I still would like to see how the SharkBite looks like.
If you need the brightness increased ,try the APA102 -144 pixels per m 🙂
With these pixels all the pipe variants will glow .
munu wrote:I finally tried out the different pipes I bought by cutting off short sections. I used a BTF-LIGHTING WS2811 5m 16.4ft 30LEDs/m 10Pixels/m 150LEDs 50pixels IP66 that I purchased from Amazon.The very left is the Apollo. What I like about it is that it diffuses the light very nicely. However, it is not very bright. The next one is from McMaster 7/8" which has half the wall thickness compared to the next one which is 1". The one to the right is also from McMaster but is the 2" version. This one gives you the nicest blurr unless the LEDs are right against the wall (as they are at the transition from the 1" to the 2"). But just like with the Apollo it is not as bright.
I am still not sure which way to go but as of now I think I would go with the 1" from McMaster but try to keep the lights away from the "front wall" (the one that people will see). The Apollo is kind of hard to bend and so is the 2" McMaster plus the 2" takes up quite a bit of storage. I still would like to see how the SharkBite looks like.
Good work.
So is the reason I almost never see anybody give any real consideration to clear polyethylene tubing pretty much entirely because people want the light diffusion?
I can't speak for others but for me light diffusion is a big factor. That applies even more because our property is small (the arches will be 2' from the pedestrian walkway) Ideally, I would go for the 2" pipe from McMaster as it has great light diffusion and it looks big. But it is also big to store which matters in my area with very limited space. So as I said, I probably will to with the 1" McMaster pipe as it has reasonable light diffusion and ok diffusion when the LED are mounted to the back. You will still see the individual lights but I think people will care more about the overall display and not even notice those individual lights.

