I have used some pixels the past 2 years but want to get into more of them in 2015. I used 300 last year, but I only had time to setup 100 this year. I have been using the px1 and it seems to be a great pixels controller, but i have started reading about the e682, and it seems to control many more pixels.
My question is:
I am planning on using more pixels, but they are going to be placed in varying places on the house, so they are not in close proximity like a mega tree would be. Would the px1 be a better option to use because the pixels are not in close proximity, or is it more of a personal preference? I realize the e682 will control more pixels with the same board, but i could place multiple px1's closer to the actual pixel strings than I could with the e682. Some of my strings could be >50' distance from the controller if I was to use the e682. The rest of my controllers are all renard 24 and 16's.
I am a creature of habit and I have been able to get the px1 working, so I am nervous about starting with a new controller that I know very little about. I did not have good luck getting my pixels working this year because of moving and only having a month to get everything redesigned, sequenced and setup for the new house. I almost did not do a show this year, but I would have kicked myself had I not done it.
I say stick with what works. If you are comfortable with the PX1 and it works for you then stick with it. I learned a long time ago, a massive overhaul is a daunting task and will suck the Christmas joy right out of you.
I have the E682s and am sticking with them because they work for me.
No one design is better than another, it depends on what fits your needs.
If the PX1 is working for you, you are comfortable with it and it will do what you need it to then stay with them. If they do not fullfill your needs then move on to another controller.
Thanks for the replies and info. I think I will stick with the px1 for a couple years to get used to using pixels. I don't have the large pixel display yet that really needs the higher pixel count of the e682. I feel I still have a lot to learn about using pixels and I should probably not throw another type of controller to learn into the mix.
