I draw your attention to...
http://doityourselfchristmas.com/forums/showthread.php?37840-AlphaPix-and-PixLite-Controller-Differences
So, the question remains now, is ... Did HolidayCoro copy the F16 (or other controller) as it appears they copied the PixLite in the past, or did they come up with a new design from scratch? I guess we will know in about a month what they have up their sleeve.
I know quite a few people who have AlphaPix controllers and have subsequently bought Falcons. I don't know anyone who has done the reverse. Just saying I don't know of anyone who folded on a Falcon and bought an AlphaPix. In fact I don't believe I have ever seen a post from anyone with a Falcon saying they are switching to ANY other controller. Not saying that its never happened, saying I haven't ever heard of it happening.
I can't say I have ever had a bad experience with HC, quite the contrary. My orders have been shipped quickly and arrived promptly in the past.
I can say the same for David Pitts (Falcon), Todd (diyledexpress), James (Boscoyo), RobG and most others too. In fact I can't say I have had a bad experience with any vendor to date.
I also can say that I have seen very few posts from dmoore bringing in help and assistance not related to something he sells. Most are pseudo sales posts like the ones above (and thats ok, where appropriate). I have never seen him in the Wednesday video meetings helping folks and answering questions.
I can say that I have seen David Pitts in the video meetings virtually every week helping solve problems and helping folks with their displays. And very few times having to help anyone with a Falcon controller. Its usually something totally unrelated to the Falcon he helps with.
I didn't see dmoore at the Expo, don't know if he was there or not. I saw dpitts there. I saw Todd there. I saw James there. I saw the folks from xLights there. I saw the folks from Vixen there. I saw many of you there 🙂
I don't see "Supporting Member" next to dmoore. I see it next to dpitts. To be fair, dmoore isn't the only vendor not supporting the forums. I feel that if you are a vendor making sales here or promoting your business, you should be though.
Guess who wrote and released for free as open source, the software most of us will rely on for the RasPi and BBB boards to run our shows (FPP). David Pitts.
I am not trying to put down HC. He has a business to run and thats perfectly fine. David Pitts has one too and thats fine too. I just ask you to look at how each one takes from and how each one gives back the the community at large and weigh who you choose to do business with.
Personally, I tend to choose people and businesses that support open source, open hardware and are active participants in the hobby and community I choose to be involved with. I chose the 3D printer I own over another of similar capability and price because that business is open source and open hardware and supports open development. They participate in forums like this and actively encourage development in the hobby. I choose my vendors for lighting products on the same basis. Those who are active in the community, those who assist others, those who give back. Its not always possible because sometimes a vendor has something you need that may not be available anywhere else, but if there is a choice, I make it with the above aspects rolled into the decision.
It looks like David let the cat out of the bag, so let me share a little.
David (HolidayCoro) will be marketing my board.
I am expecting the second set of boards back from assembly next week.
When the boards arrive, and I have tested them, I will post a picture of the controller and list the specifications to which the controller is designed to meet.
The controller will be available to a small group of individuals for testing this season with full production release early 2017.
Hope that puts a little light on the new board that HolidayCoro will be offering.
Joe
JHinkle wrote:It looks like David let the cat out of the bag, so let me share a little.David (HolidayCoro) will be marketing my board.
I am expecting the second set of boards back from assembly next week.
When the boards arrive, and I have tested them, I will post a picture of the controller and list the specifications to which the controller is designed to meet.
The controller will be available to a small group of individuals for testing this season with full production release early 2017.
Hope that puts a little light on the new board that HolidayCoro will be offering.
Joe
Congrats, glad you were able to bring it to market, that's great!
Short and badly typed since written from my phone...
dpitts wrote:Whether you buy a Falcon or not call me anytime to discuss your show. Number at top of PixelController.com
How can you possibly beat this guy for innovation and Customer Service
dmoore wrote:Oh Jim, wait for a month and I think you'll be blown away with what is coming down the pipe from HolidayCoro. We are readying the release of a controller that bests every single controller on the market in terms of easy of use, setup and functionality. I believe we will be redefining what "bang for the buck" is.🙂
How about capacity? Talk is cheap.......... 😆
this thread has gotten sad :ohmy:
