Hey guys, first time post here and I'm looking for some insight on changing up my basic Christmas light setup. The past few years I have used C9 size LED bulbs for the roof line of my house. I have five 25' sets of lights, four connected in one strand, and one single strand. What I'm thinking of doing is using 6803 or 2811 5050 Dream Color LED strips this year but after searching the interwebs, I'm more confused than ever. I have a couple reasons for this change. First, they would (should) be easier to install, don't have to clip them every foot. They will look a little better with motion, new colors, etc compared to my traditional LED multicolor lights. I'm not looking to get into the synching them with music or anything, just want some preset animations for light chase, twinkle, etc like some of the cheap eBay controllers have.
Here's some of the questions I have:
1. How many 5m strips can be run off a single chain? I would need to connect six 5m strips together for the main run of lights (93'/28.4m) then have two sets connected together for the second run (25'/7.6m). Injecting power in the middle of the 30m chain a couple times won't be an issue but I would like to keep six strips on one run if at all possible. There's a separate peak on my house that will require the two strips together.
2. What is a good controller for the lights? As I already mentioned above, I'm not looking to do custom animations, just want some nice light chasing, flashing, etc. Something that I can manually change when I want. Having said that, I'm not opposed to computer integration, but I won't sync these to music and don't have the countless hours to spend on programming.
3. I have a basic home automation setup with z-wave controlled outlets outside. My HA system controls these outlets to come on and off when needed, along with the rest of my outside decorations. I will need a controller that comes on to the last state each time the controller is powered up.
What's out there that will work for my needs? Not looking to spend a ton of money here, trying to keep it under about $400 if I can. With the RGB stirps on Amazon/eBay, I'm already in for about $300 just for lights.
Here's a quick pic of my setup. Not the best pic, taken from Google, but you get the idea.

Here's a few pics from last year. The LED icicle lights on the porch, the led string lights on the had rails, and the LED C9 bulbs around the flower bed will all stay, for this year at least.



Typically the 5v strips need power injection every 5m. 12v strips, every 10m.
The issue with strips in Xmas lighting is that you end up with lots more LEDs than you want.
Look into pixels instead of strips. A 3conductor cable goes between each light and typically there are 4inches between pixels. You'll want a e6904 controller and several 50 count pixel strings, either wa2811 or 2801. 2811 are cheaper and more common on eBay or Ray Wu store.
This said though, you are starting late to make such a change. Go ahead and order your stuff and make a go of it, but plan all the tech development to go into next years show. That way you won't be stressed about it - this is supposed to be fun.
As for commanding it, you'll need some kind of computer programmed to make the patterns. A Falcon PI is popular for this even if there is no music. You can sequence a nice background pattern on the computer and have falcon pi play it endlessly.
Thanks shockwave! So with the pixels, how do you mount them? I'm a little OCD so they will all need to be mounted in a strait line, I don't want them just hanging and sagging randomly. Using shingle clips doesn't sound fun either, my C9s with 12" spacing is bad enough, especially on my fully extended 40' ladder.
This is the reason I was thinking about using the strips since I could mount them to PVC and put them up in long runs.
What about the strips in PEX? I think that would look good and everything can be contained within the PEX for better weather performance.
So, I ordered me some lights from Ray Wu. Let's hope they get here in the next few weeks. I did chose DHL shipping so as long as he ships within the 8 days that's shown on his site, I should be good. Here's what I ordered:
10 each LED Strips
2 each LED string. Not sure what I'm going to do with these yet, but I've got them coming!
For the power supply, I will probably go with something like this: http://www.amazon.com/Universal-Regulated-Switching-Computer-Project/dp/B00D7CWSCG/ref=sr_1_1?ie=UTF8&qid=1413471378&sr=8-1&keywords=30a+power+supply
Now I need some serious help with the controller. I think I can handle this once I get all the right pieces, I just need help getting to that point. The e6904 and Falcon PI were mentioned but I can't seem to find a lot of info on those. Also seen Arduino mentioned as well, what's the deal with that one?
So, I ordered me some lights from Ray Wu. Let's hope they get here in the next few weeks. I did chose DHL shipping so as long as he ships within the 8 days that's shown on his site, I should be good. Here's what I ordered:
10 each LED Strips, 12V, 2811.
2 each LED string, 12V, 2811. Not sure what I'm going to do with these yet, but I've got them coming!
For the power supply, I will probably go with a single 30A power supply from Amazon.
Now I need some serious help with the controller. I think I can handle this once I get all the right pieces, I just need help getting to that point. The e6904 and Falcon PI were mentioned but I can't seem to find a lot of info on those. Also seen Arduino mentioned as well, what's the deal with that one?
I'll also mention that I can easily get an Ethernet connection to the area outside under my porch where I'll bring everything back to and I have spare computers that I can dedicate to controlling everything.
I think you'll need more than one 30-amp power supply. According to information from www.Holidaycoro.com, each 5 meter strip will draw about 6.2 amps. So, doing the math, you'll need over 62 amps just for your pixel strips alone. The pixel strings will use about another 3 amps each. With power supplies, I wouldn't recommend loading them with more than 75% of their rated capacity. So, with that being said, you may need about 100 amps of DC power. The estimates mentioned are for all pixels on at white color.
If you need more info on the 6802 controller, go to http://www.sandevices.com/E681info.html . This is the same controller that a many of the people here use for their pixels. It's available in either kit or assembled form. The controller (e6802) has 16 outputs for your pixels (either strips or strings). Sandevices also has a smaller controller (e6804) that has 4 outputs and it too is available in either kit or assembled forms. One very nice feature of these controllers is that they use the network connection on your computer for communications, so you won't need to buy any dongles or other hardware to connect to your computer. And the owner/developer of the device is also a member here, so help is just a shout away.
There are several other companies that offer pixel controllers. Holiday Coro has Pixlite16's and Pixlite4's. And at www.falconchristmas.com, they have falcon F16's and F8's. I think that you'll find the majority of all pixel controllers use the network connection on your computer. Setup on all of these controllers is fairly simple using their own internal web server.
Hope this helps.
The PEX tubing is a good way to mount these lights, protects them from the elements, diffuse the light a bit and you can run your power injection wires right in the PEX with the strips, so a clean look. Since the lights diffuse the light in the tube you don't really see anything inside the tubes like the wiring or anything. Bad thing is it is hard to get the PEX to hold a straight line, will need to make some clips to support it, there are a few guys on here who have made some pretty good ones, I think Dr Neutron had a decent design for doing this.
This will take a little design work to figure out though, without a doubt you will need to do some power injection with the lengths you are working with. For the type of control you are looking at 12V would be the way to go, I would imagine 3- 5M strips at 30 LED/M on 12V pulled into PEX should work with power at the start and end of each run. You will need more than 1 power supply to drive all of these, try 2 and buy a spare just in case. I would check at DIYLEDEXPRESS and see if they have the power supplies you need in stock.
For controllers I am biased towards the sandevices ones, I have had good luck with them, price point is right. An E6804 should do what you need, is small and E1.31, so DMX over Ethernet, so just using Ethernet networking, wireless routers if you like and so forth. If you may add more later, then just go with the E682 right off the start.
tommy wrote:I think you'll need more than one 30-amp power supply. According to information from www.Holidaycoro.com, each 5 meter strip will draw about 6.2 amps. So, doing the math, you'll need over 62 amps just for your pixel strips alone. The pixel strings will use about another 3 amps each. With power supplies, I wouldn't recommend loading them with more than 75% of their rated capacity. So, with that being said, you may need about 100 amps of DC power. The estimates mentioned are for all pixels on at white color.If you need more info on the 6802 controller, go to http://www.sandevices.com/E681info.html . This is the same controller that a many of the people here use for their pixels. It's available in either kit or assembled form. The controller (e6802) has 16 outputs for your pixels (either strips or strings). Sandevices also has a smaller controller (e6804) that has 4 outputs and it too is available in either kit or assembled forms. One very nice feature of these controllers is that they use the network connection on your computer for communications, so you won't need to buy any dongles or other hardware to connect to your computer. And the owner/developer of the device is also a member here, so help is just a shout away.
There are several other companies that offer pixel controllers. Holiday Coro has Pixlite16's and Pixlite4's. And at www.falconchristmas.com, they have falcon F16's and F8's. I think that you'll find the majority of all pixel controllers use the network connection on your computer. Setup on all of these controllers is fairly simple using their own internal web server.
Hope this helps.
Thanks! You must be looking at the 60/m LED strips. The 30/m strips like I bought only draw 3A max. For what I'm doing this year, a 30A power supply should be sufficient. I doubt I will use all 50m of strips and both strings. If I do, I'll just buy me a second power supply. I've found 350W power supplies on Amazon for about $22 that have great reviews. Might even go ahead and buy two anyways at that price. I've been reading about the Sans and Coro controllers and they both look like they would be way more than enough for me needs with plenty of room to grow. Hopefully I can get my hands on the Sans since it's a bit cheaper. I've already blown my $300 budget out of the water, what's another couple hundred. LOL
Electrified3 wrote:The PEX tubing is a good way to mount these lights, protects them from the elements, diffuse the light a bit and you can run your power injection wires right in the PEX with the strips, so a clean look. Since the lights diffuse the light in the tube you don't really see anything inside the tubes like the wiring or anything. Bad thing is it is hard to get the PEX to hold a straight line, will need to make some clips to support it, there are a few guys on here who have made some pretty good ones, I think Dr Neutron had a decent design for doing this.This will take a little design work to figure out though, without a doubt you will need to do some power injection with the lengths you are working with. For the type of control you are looking at 12V would be the way to go, I would imagine 3- 5M strips at 30 LED/M on 12V pulled into PEX should work with power at the start and end of each run. You will need more than 1 power supply to drive all of these, try 2 and buy a spare just in case. I would check at DIYLEDEXPRESS and see if they have the power supplies you need in stock.
For controllers I am biased towards the sandevices ones, I have had good luck with them, price point is right. An E6804 should do what you need, is small and E1.31, so DMX over Ethernet, so just using Ethernet networking, wireless routers if you like and so forth. If you may add more later, then just go with the E682 right off the start.
I'm all about a clean look, so the PEX is at the top of my mounting choices. My local Lowes has 10' x 3/4"sticks that are straight so I might go this route. I really don't want to mess with straightening out 100' of coiled PEX. Can you use standard PVC couplers to join them? If not, what works best? Maybe some white duct tape?
My other preferred option is attaching them to the outside of 1/2" pvc. This still gives me the conduit for injection wires, but still looks clean.
Thanks! You must be looking at the 60/m LED strips. The 30/m strips like I bought only draw 3A max. For what I'm doing this year, a 30A power supply should be sufficient. I doubt I will use all 50m of strips and both strings. If I do, I'll just buy me a second power supply. I've found 350W power supplies on Amazon for about $22 that have great reviews. Might even go ahead and buy two anyways at that price. I've been reading about the Sans and Coro controllers and they both look like they would be way more than enough for me needs with plenty of room to grow. Hopefully I can get my hands on the Sans since it's a bit cheaper. I've already blown my $300 budget out of the water, what's another couple hundred. LOL
I'm all about a clean look, so the PEX is at the top of my mounting choices. My local Lowes has 10' x 3/4"sticks that are straight so I might go this route. I really don't want to mess with straightening out 100' of coiled PEX. Can you use standard PVC couplers to join them? If not, what works best? Maybe some white duct tape?
My other preferred option is attaching them to the outside of 1/2" pvc. This still gives me the conduit for injection wires, but still looks clean.
Also, has anyone looked into SDR piping? My Lowes shows to have SDR21 3/4" x 10' straight sticks in stock as well for about half the price. Looking at the specs of 3/4" PEX, the wall thickness is about 0.100" and the 3/4" SDR21 is only 0.060". So in theory, you should get a little more light through the SDR pipe. I haven't actually laid eyes on both to compare them.
In the PEX tubing just be sure it doesn't have the black core to it, has to be white all the way through. For the ends, the rubber caps at Lowes or Home Depot that go on the bottom of chair legs work well, can cut a slit to pass the cable through them and seal up the end while looking decent, I tried the tape, just doesn't do as nice of a job. 10' lengths won't line up well with your 5M strips though, I have just bought the 100' roll cut into 6 equal lengths and each strip fits perfectly into them. takes a little bit of playing rolling it in the opposite direction to straighten it out and a few days stretched out straight in the sun help a lot.
I would not trust the specs for current draw posted as well, rarely found those are correct. Safe bet is to account fo 0.06A each, 20mA per LED, 3 LED's = 60mA or 0.06A, so 5M of pixels, 30 LED/M is 150 pixels, so 150*0.06. This is full on of all 3 LED's but is worst case scenario that you should allow for. Myself, I have run 10 strips of 30LED/M off of a single supply but at 5VDC and you should hear it scream when you push out all white, so just we aware to have an extra power supply just in case. One other thing to consider as well, in 12VDC pixel strips they are generally controlled in groups of 3, 5 VDC are typically individual control. So you do get an advantage with 5VDC but have to deal with the power injection issues. For something simple like what you are starting with should not be important for that but just an FYI.
I would highly suggest ordering a controller right away, these things get in short supply this time of year.
Got a nice little email this moring from Ali Express saying my credit card was rejected. Not sure what's going on there, but whatever. They had a chat button on the website so I thought I'd give that a try and see if I could pay with PayPal. Sure enough at 7:00 AM CST, there was someone on the line! They had no problem sending me a PayPal invoice and gave me a great price on shipping. I even added 10 waterproof pigtail connectors and two more LED strips and it was just a few dollars more than the original purchase. Hopefully they go out soon so I can start building! Not sure what I'm going to do with 30 extra meters of light strip, but I'll figure something out!
What's everyone's thoughts on the PixLite 16 controller compared to the SansDevice? I can't seem to get ahold of the Sans guy to purchase one.
For the mounting, I think I have decided to toss everything into some pex. I can get the straight 10' sticks at Lowes so I don't have to deal with curved pipe. My main peak of the house is right at 20' on each side, so that would work out well. I can also store 20' runs pretty easily in my garage for easy deployment next year. The smaller peak will have a couple of 12.5' sticks and the gutters will have a 22' and 10' stick.
Now for another question. What I'm envisioning is having a waterproof connector pigtail at each end of light sticks (as I am calling them). For the 20' sticks, the LED strip is 16', will it be an issue to have 16' and 4' connected together (soldered inside the pipe), then a weather connector that jumpers over to the second stick with the same 16'/4' setup?
So to recap on the main roof peak, I'll start off from the controller with 12 gauge wire (have a lot of it on hand) to the beginning of this channel. This will be about a 30' run. Then at the beginning of the 12m run I'll have the incoming pigtail, 16' strip, 4' strip, pigtail to pigtail of next stick with 16', then 4'. I'll run the 12 gauge power wire through the first tube and inject power at the second 16' run. Will this work? Figuring 10 pixels per meter, I'll set this channel up as a 120 pixel element in Vixen.
I've also been playing around in Vixen and I think it will work very well for what I want.
Just ordered my E682 from Jim. Got to talk to him today and he was a huge help.
Sent from my Samsung Galaxy Note 3.

