Hi all, I have been extremely interested in having a light show for years and have finally decided to jump in. When I say jump in, I am going all in! I already have the layout and have messed around in xlights and know what I am wanting to do and just asking for advice or insights on what I am jumping into.
10 x 500pc Ws2811 12v pixels
30 x 5M 60Led/M ws2811 12v strips
1 x Raspberry Pi 3
4 x Falcon 16v3 controllers
8 x 12v30a power supplies
1x FM transmitter
2 chromamesh matrix layouts
Lots of chroma trim
Is this enough to get started? Any recommendations?
Sent from my SM-N960U using Tapatalk
What do you plan on doing with the strips?
FYI - most of us have found that working the design up first, then figuring out what it will take to bring the design into reality works best. In this way you can see how many of this, and which of that you will need. I would even go as far as saying you should work up your sequences to see if you can convey what you want to with the things you have in your design, or if you need more.
Now, to answer your question, it is a good list - so far.
algerdes wrote:What do you plan on doing with the strips?FYI - most of us have found that working the design up first, then figuring out what it will take to bring the design into reality works best. In this way you can see how many of this, and which of that you will need. I would even go as far as saying you should work up your sequences to see if you can convey what you want to with the things you have in your design, or if you need more.
Now, to answer your question, it is a good list - so far.
I'm going to build matrix's with the led strips
Sent from my SM-N960U using Tapatalk
Sort of confused, "ChromaMesh" is a pixel (bullet or square) frame. LED strips and ChromaMesh don't really go together.
algerdes wrote:Sort of confused, "ChromaMesh" is a pixel (bullet or square) frame. LED strips and ChromaMesh don't really go together.
The chroma mesh will be for a pixel matrix on the garage, the chroma trim around the house trim, the strips I am going to make wooden boards with the strips in a matrix for bigger chunks of the exterior and for the fencing
Sent from my SM-N960U using Tapatalk
