OK, I have read enough in the past few months (ChristmasWiki, this forum, other websites, beginner guides, etc.) to completely scramble my brain and I feel as if I don't know much more now than when I originally started. I would like to get a simple show started for Christmas of 2017. That will give me (and my wallet) time to get things rounded up, rather than trying to cram a bunch of money and information into these last couple of months. I am a big time DIY guy and I do know how to solder, and understand simple electronics, but I am far from an expert. So this is my idea in order to get things started and get my feet wet with understanding the basics, only in a smaller (easier to deal with) situation.
On my property, I have a privacy fence about 135 feet long with 4x4 posts every 8 feet. On each of these posts I have glass globes with the solar LED lights in them. I would like to take these solar LED's out and put controllable LED's in them (orange & purple for Halloween / red white & blue for 4th of July/etc.). These will be incorporated into my Christmas show next year but since these are a permanent fixture and will be up year round, I would "like" them to be dimmable as well.
For the majority of the year, the lights will stay on solid with the exception of Halloween and Christmas. I will only need a few LED's for each glass globe, but what kind, size, type will I need ? Also, with 18 different posts/globes what kind and how many controllers will i need ? If at all possible for a limited budget, I would like to be able to just run a power wire to the fence and have the controllers and all programming based there without having to leave my laptop outside ? I have already downloaded Vixen 3 and plan to use this for my operations.
I just feel like instead of going to different car lots, I am looking at a massive car parts store that contains every piece of every model of car, and I am told to build a supercar... yet knowing nothing about vehicles. If anyone has suggestions, please explain away ... I am all ears ! Or if anyone has any links, I would appreciate that too ! I have tried to search for my specific questions, but keep coming up with 1 billion answers and variations to them.
Thanks to anyone who helps !!!!
Adam S.
Mid-Eastern Indiana
If I had your situation I would do the following:
Five (5) pixels in each globe. That is a total of 5 x 18 = 65 pixels
You will need to run a pair of thin wires for data and ground from one globe to the next in sequence from the first globe to the last.
I would use an ESPixelStick as the controller in the first globe. The ESPixelStick can control several hundred pixels so you should have no issue with them.
I would set up a PI running FPP software to generate the E1.31 traffic the ESPixelStick will need to control pixels. You can set it up to send one update packet a minute.
I would then create an interesting sequence that does pleasing things that can be presented during non show times. A sequence that does a slow fade from one color to the next or a wave that takes minutes to complete. This can be set up to run daily at times that are appropriate for your area.
Then at Halloween you can use sequences more in tune with the holiday.
The upside is that you can have any color you want at any given time of the year using just the PI/FPP in the house. The FPP has a web page you can use to trigger special sequences when you are having guests or a special event.
The ugly part is power distribution. If you use 12v pixels then you can run power to each post under ground (along the fence). You will need a minimum 50W 12v supply. I would use any cost effective supply from 60W up to 250W to provide the power. You can use the low voltage yard lighting cable available at Lowes or Home Depot. It can be buried and is rated for freezing.
Hope this helps give you some ideas.
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
This is an awesome start and definitely narrows my research down considerably ! Thank you VERY much !!
You are very welcome.
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
I did think of an additional thing you can do but it would increase your cost a bit. Most fences have a horizontal bar about 2/3 of the way up the fence. You could mount a pixels strip on the under side of that bar with the leds pointing down. This would have the effect of lighting the fence in various colors and would be a pretty neat effect. It would take more power, but the single ESPixelStick has the capacity to handle these strips in addition to the globes. Since you are running power to each globe, you already have the power drop you need to drive the strip. Since you have a strip between posts, you would not need a data/ground run between globes. You would set up your lights as Globe1/strip1/globe2/.../globe17/strip17/globe18. Actually makes things simpler and gives a much nicer pallet for doing effects on the fence.
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
I like your way of thinking ! I am definitely going to have to do this, now that I think about it some. Now, I just need to figure out how to get my hands on a Pixelstick. Lol.
Thanks again !
An espixel stick can do up to four universes (680 pixels). I too would use the 30/10 (10 pixels per meter) strips. With 8' fence sections you would use half a strip per section that would be 25 pixels (75 LEDs) per fence section. 17 x 25 = 425 pixels leaving you a budget of 255 pixels to put into the globes. Just to be safe, you might want two pixel sticks, one at each end of the fence.
You can buy a version of the ESPixelStick here: http://www.renard-plus.com/rpespwifipixel.html
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
A PI with hat will have a problem with this number of pixels (I cant seem to run mine reliably for more than about 340 pixels). The ESP is smaller (would fit in a 1" PVC tube near the globe). I personally prefer to keep the PI indoors or near house where it is safe and easy to access.
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
I think power distribution will be your biggest issue. The total distance (135') is a LONG way. I recommend you use two 12V power supplies. Mount each one in a waterproof box and place them along the fence (ideally the first one goes 34' from the start and the second one 34' from the end). That way your longest run is only about 34'. You should be good with 16 or 14 gauge wire, depending on how much current you need to pull. Then you can run 120VAC to each box. For data, just make sure you use twisted pairs or coax cable or you will have problems with data corruption on the long runs. Ideally you would disperse your controllers along the fence as well. Probably best to put them in the same enclosures as the power supplies.
Should not be more than 3 feet between the end of one pixel and the start of the next set (Globe to rail to globe).
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
A Pixel controller like the inexpensive ESPixelStick only supports a single output. What that means is you cannot put an ESPixelStick controller in the middle of a string and have it do the right thing to the left and right. You have to put it at the start of the string and drive the rest of the string from that point. Don't worry about the distance from the controller to the end of the string. For pixel data (power is a different subject) you only need to worry about the distance between two adjacent points. For example: Distance from the controller to the first pixel must be less than N feet (determined by wire, resistors and a whole lot of other complex stuff). The biggest distance between any two pixels that need to connect to each other is a maximum of N feet (determined by wire, resistors and a whole lot of other complex stuff). There are ways of extending N by using NULL pixels or line buffers. For me, using cheap wire, N is about 20 feet. Using good wire you can get that to 50'. But for your fence, the largest distance between any two adjacent pixels should not be getting anywhere near that 20' mark (more like 2-3 feet).
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
MikeKrebs, yes I plan on gathering the supplies needed to accomplish this before Christmas. After all, it's just a few globes and a few sections of fence. enough to get started on the learning process. But on the same token, if it does not happen BY Christmas, I won't be entirely upset.
When you suggest testing the pixels per light, are you saying to check each light for operation individually, or are you saying start with 3...if not bright enough, go to 4...and so on ? Not trying to sound difficult, just making sure I understand where you are coming from.
Also, I have just started looking into power supplies and I am not sure which way I am going yet, but I have considered using 2 separate supplies...depending on size and price per unit.
Martin, I am sure I will have more questions for you as time goes =) for example you mentioned a pixel stick at each end...would that be in order to have each stick operate their perspective half of the lights, or am i missing something on this ? If this is a dumb question, i apologize... I'm still fresh at this. The link you provided for the Renard Pixel controller states they are out of stock. Time for me to send a couple emails to find out who will have these available, and when. I can't thank you enough for taking the time to explain these things in a language I can understand !
Mike central, what you have described for power distribution, was my original thought on making sure there was a consistent power flow throughout the entire fence row...two is usually better than one right ? And power supplies are really all that expensive.
I am going to do some more measuring and planning tonight after work. I do believe I shouldn't have more than 18" between strip & globe.
Thank you many times over to those who are helping get me going with this !!!
Adam S.
Yes, two supplies are better than one. You can source more current and can have shorter runs. You should add up all of current you need to source and make sure you buy 12V power supplies beefy enough to handle it. This supply works well and is available from multiple sources https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&productId=2219807
When you use two ESPixelSticks, then you will split your fence into two strings. You do that simply to handle the total pixel count. From what I can see, unless you try to turn the globes into sky beacons, most likely you can do this using a single ESP.
I suggested 5 pixels in the globe based on an element in my display where I had a glowing cage lined with a diffusing paper. 5 pixels gave good light and coverage. You will need to play with that count to get the light level that works best for you.
[/SIGPIC]
2026 - Four more 3d printed singing faces, vertical strips for the arches, 2 new 24px24p matrix signs for the sides of the yard.
2025 - Added two 3d Printed singing light bulbs, Added Stars on top of mid and mini trees
2024 - Prop rebuilds
https://www.youtube.com/user/MartinMueller2003
On the power supply's... I just had (5) working 250w Dell computer power supply's given to me for free. I already picked them up. Will these work, or should I just spend some $ and get something different ?
