Comm Port Limits us...
 
Notifications
Clear all

Comm Port Limits using PX1

3 Posts
2 Users
0 Reactions
1,486 Views
rice66
Posts: 246
Topic starter
(@rice66)
Reputable Member
Joined: 19 years ago
[#38226]

I am late in putting final details to my mega tree. I plan to use PX1,s (3) at 200 pixels each for a (12) 50 pixel strings (600) ,all ws2811 chips.
I was reviewing the information on the setup of a px1 and came across what appears to be a show stopper...
I read that the channel limits on a com port is approx 191 at 115200 baud rate..
I use two usb to serial adapters which is com6 and com7.
Question:
Will i have to come up with another usb to serial adapter for each px-1 I plan to use? cause I was planning in sending data from one com port
then daisy chaining to two other px1's for the 600 channels..
Help
Rice66


2 Replies
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

You can increase the baudrate to 230Kb. This doubles the channels on the serial line. A bit of advice though: even at 230Kb, there is noticeable lag when you have more than 300 pixels on the serial port.


Reply
rice66
Posts: 246
Topic starter
(@rice66)
Reputable Member
Joined: 19 years ago

thanks for quick reply, ordering a usb to serial adapter asap, as a short term fix...e1.31 adapter appears to be my long term answer!
rice66


Reply
Share: