Notifications
Clear all

Missing overcoat

11 Posts
7 Users
0 Reactions
25.9 K Views
Posts: 15
Topic starter
(@robbieshields)
Eminent Member
Joined: 7 years ago
[#52577]

Going through my SSRs replacing all the triacs and ran across this:

Capture

Do I need to worry about this or get an overcoat pen and repair it?


10 Replies
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

you need to solder a wire over that. if not, you will have dead channel just as the whole family is watching the show.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago
RobbieShields wrote:Going through my SSRs replacing all the triacs and ran across this:

Do I need to worry about this or get an overcoat pen and repair it?

Coating is just a protection from you shorting to another trace. Looks like the trace is still there and intact so nothing required, but I’ve used a little super glue to seal/protect in the past


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

In our environment the coating also provides protection from moisture. That area is now open for corrosion. SuperGlue will work.


Reply
Posts: 15
Topic starter
(@robbieshields)
Eminent Member
Joined: 7 years ago

Thanks!

Sent from my SM-G965U using Tapatalk


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Nail polish also works. Any color will do.... as will clear....


Reply
Posts: 15
Topic starter
(@robbieshields)
Eminent Member
Joined: 7 years ago

I thought that might work, but wasn't sure. Thanks!

Sent from my SM-G965U using Tapatalk


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

I caution the color nail polish. Today’s product may have color pigment containing electrical carrying property. Clear should be ok


Reply
Posts: 447
(@glycerine)
Honorable Member
Joined: 7 years ago

Or just use liquid electrical tape.


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

Would conformal coating work as well?
I use the acrylic type from MG chemicals on new boards, just brush it on.


Reply
Page 1 / 2
Share: