Renard AC SSR8 Heat...
 
Notifications
Clear all

Renard AC SSR8 Heating Up

7 Posts
2 Users
0 Reactions
12.6 K Views
Posts: 13
Topic starter
(@andy97)
Active Member
Joined: 8 years ago
[#50098]

Hi everybody,

I am trying to setup a christmas light display for the first year. I have a couple Renard SSR 8 boards. However, when I was testing them, I noticed that the Triacs are getting rather hot. They were only on for about 5 or 10 minutes. Is this normal?


6 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Well, depends....how much of a load in amps do you have on each channel? Is there a heatsink installed?
And do you mean this is a Renard SS8 V1.0


Reply
Posts: 13
Topic starter
(@andy97)
Active Member
Joined: 8 years ago

Yep, it's the SS8 with no heatsinks. That channel had about 2 sets of icicles on it. I'm not sure how many amps that would be. Around 6 light series


Reply
Posts: 13
Topic starter
(@andy97)
Active Member
Joined: 8 years ago

It's about 6 amps right now. I plan on dividing those lights among two channels so that it would be 3A on each. Would 3A still be too much on one channel?


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

Yes sir, too much. 2A is the max per channel, and you should have a heatsink on there.

Read this part of the wiki....
http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_SS8_Controller_Board#AC_Power:


Reply
Posts: 13
Topic starter
(@andy97)
Active Member
Joined: 8 years ago

Thanks for your reply, Wayne.
Also, is there a specific heat sink I should get for the triacs? Or is something like this fine: https://www.amazon.com/dp/B072ZSBH17/ref=cm_sw_r_cp_apa_i_lbUfCbTP1W1DC


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago
andy97 wrote:Thanks for your reply, Wayne.
Also, is there a specific heat sink I should get for the triacs? Or is something like this fine: https://www.amazon.com/dp/B072ZSBH17/ref=cm_sw_r_cp_apa_i_lbUfCbTP1W1DC

This is what you need..... (all things SS Renard are in the wiki :thup: )

http://www.doityourselfchristmas.com/wiki/index.php?title=Assembly_Instructions_The_Renard_SS8#Triac_Heat_Sink

or I can send one that I sell with the kits (like the picture). PM me for details.


Reply
Share: