Dirk Cheap SSR Issu...
 
Notifications
Clear all

Dirk Cheap SSR Issues

58 Posts
14 Users
0 Reactions
26.6 K Views
DaveJZ
Posts: 974
Topic starter
(@davejz)
Noble Member
Joined: 16 years ago
[#22205]

Here's what I have...

I use a couple Renard 64 Controllers and one Simple 24 channel Controller...

I bought a few Dirk Cheap SSR's and soldered them up...

They work fine on the Simple 24 but I get nothing out of them on the Ren64. I did have a "Regular" SSR that I swapped with and get full light function.. I've tried different cables etc and still cannot come up with a solution.. I guess I don't understand why they work fine on the Simple... But not the Ren64

HELP PLEASE!!! Thanks in Advance
Dave


57 Replies
komby
Posts: 871
(@komby)
Prominent Member
Joined: 14 years ago

I had some issues with my setup of ren64 and dirkcheap where fading worked but 100%on didn't.

In that case it was the firmware was not PWM. So my led wouldn't turn on.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Only thing I can think of is to use PWM mode in the Renard firmware. I'll bet you're in the old regular Renard mode... PWM is more-or-less the intended standard now but it can be turned off.


Reply
DaveJZ
Posts: 974
Topic starter
(@davejz)
Noble Member
Joined: 16 years ago

nope nope nope and nope.......

Board power supply
Talked to Wayne J and narrowed it down to about nothing wrong....

Decided to take a leap of Faith and change the transformer powering the board.... well the leap worked.. and I have no broken legs or aches... only a hour or so of figuring it out.....

I guess we should make a side note that if a regular A/C SSR works... but DirksSSR's do not.. CHECK THE BOARD SUPPLY POWER FIRST!!!


Reply
kychristmas
Posts: 3955
(@kychristmas)
Famed Member
Joined: 18 years ago

I'm confused. Are you saying the DirkCheapies require more power?


Reply
Page 1 / 12
Share: